Prediction of Three-Dimensional Downward Flame Spread Characteristics over Poly(methyl methacrylate) Slabs in Different Pressure Environments
Open Access
Abstract
The present study is aimed at predicting downward flame spread characteristics over poly(methyl methacrylate) (PMMA) with different sample dimensions in different pressure environments. Three-dimensional (3-D) downward flame spread experiments on free PMMA slabs were conducted at five locations with different altitudes, which provide different pressures. Pressure effects on the flame spread rate, profile of pyrolysis front and flame height were analyzed at all altitudes. The flame spread rate in the steady-state stage was calculated based on the balance on the fuel surface and fuel properties. Results show that flame spread rate increases exponentially with pressure, and the exponent of pressure further shows an increasing trend with the thickness of the sample. The angle of the pyrolysis front emerged on sample residue in the width direction, which indicates a steady-burning stage, varies clearly with sample thicknesses and ambient pressures. A global non-dimensional equation was proposed to predict the variation tendency of the angle of the pyrolysis front with pressure and was found to fit well with the measured results. In addition, the dependence of average flame height on mass burning rate, sample dimension and pressure was proposed based on laminar diffusion flame theory. The fitted exponent of experimental data is 1.11, which is close to the theoretical value.Keywords
Funding Information
- National Natural Science Foundation of China (51636008)
- Key Research Program of Frontier Sciences (CAS [No. QYZDB-SSW-JSC029])
- Fundamental Research Funds for the Central Universities (WK2320000035)
This publication has 36 references indexed in Scilit:
- Downward flame spread over PMMA sheets in quiescent air: Experimental and theoretical studiesFire Safety Journal, 2006
- Relation of opposed flow (creeping) flame spread with extinction/ignitionCombustion and Flame, 2003
- Creeping flame spread: Energy balance and application to practical materialsSymposium (International) on Combustion, 1996
- Characterization of flame spread over PMMA using holographic interferometry sample orientation effectsCombustion and Flame, 1988
- Flame Spread ModelingCombustion Science and Technology, 1984
- Buoyancy effects on flames spreading down thermally thin fuelsCombustion and Flame, 1980
- A theory of flame spread over a solid fuel including finite-rate chemical kineticsCombustion and Flame, 1979
- A theory of laminar flame spread over flat surfaces of solid combustiblesCombustion and Flame, 1977
- The Effect of an Uninhibited Edge on Downward Flame PropagationCombustion Science and Technology, 1976
- Spread of a laminar diffusion flameSymposium (International) on Combustion, 1969