Effects of spray characteristics on combustion performance of a liquid fuel spray in a gas turbine combustor
Authors:
- 10 March 1999
- journal article
- research article
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 23 (3) , 217-228
Abstract
Spray characteristics like mean drop diameter and spray cone angle play an important role in the process of combustion within a gas turbine combustor. In order to study their effects on wall and exit temperature distributions and combustion efficiency in the combustor, a numerical model of a typical diffusion controlled spray combustion in a can‐type gas turbine combustion chamber has been made. A simple k–ϵ model with wall function treatment for near‐wall region has been adopted for the solution of conservation equations in carrier phase. The initial spray parameters are specified by a suitable PDF for size distribution and a given spray cone angle. A radiation model for the gas phase, based on modified first order moment method, and in consideration of the gas phase as a grey absorbing–emitting medium, has been adopted in the analysis. It has been recognized that an increase in mean drop diameter improves the pattern factor. However, the combustion efficiency attains its maximum at an optimum value of the mean diameter. Higher spray cone angle increases the combustion efficiency and improves the pattern factor, but at the same time, increases the wall temperature. Copyright © 1999 John Wiley & Sons, Ltd.Keywords
This publication has 17 references indexed in Scilit:
- A Computational Study of Pressure Effects on Pollutant Generation in Gas Turbine CombustorsJournal of Engineering for Gas Turbines and Power, 1997
- Numerical study on heat and mass transfer in a liquid-fueled gas turbine combustorInternational Journal of Heat and Mass Transfer, 1993
- The Flow Inside a Model Gas Turbine Combustor: CalculationsJournal of Engineering for Gas Turbines and Power, 1993
- Development of a hybrid k‐ε turbulence model for swirling recirculating flows under moderate to strong swirl intensitiesInternational Journal for Numerical Methods in Fluids, 1993
- Scalar Characteristics of Combusting Flow in a Model Annular CombustorJournal of Engineering for Gas Turbines and Power, 1989
- A Detailed Characterization of the Velocity and Thermal Fields in a Model Can Combustor With Wall Jet InjectionJournal of Engineering for Gas Turbines and Power, 1989
- Velocity Characteristics of Isothermal and Combusting Flows in a Model CombustorCombustion Science and Technology, 1986
- Velocity, temperature, and species characteristics of the flow in a gas-turbine combustorCombustion and Flame, 1986
- Temperature and Composition Measurements in a Research Gas Turbine Combustion ChamberCombustion Science and Technology, 1983
- Calculating three-dimensional flows around structures and over rough terrainJournal of Computational Physics, 1972