Melt electrospinning of poly‐(ethylene glycol‐block‐ϵ‐caprolactone)
- 19 September 2006
- journal article
- research article
- Published by Wiley in Biotechnology Journal
- Vol. 1 (9) , 998-1006
Abstract
Various block copolymers of poly(ethylene glycol) and poly(ϵ‐caprolactone) (PEG‐b‐PCL) with molecular weights between 7000 and 26 900 g/mol were synthesized, and melt electrospun at temperatures between 60°C and 90°C. Two types of fibers were collected, including excellent quality fibers – highly coiled and continuous, with a constant diameter and relatively defect free. Such fibers, termed “solid fibers”, were sufficiently cooled during their path between the spinneret and the collector that the symmetric fiber shape is maintained after landing on the collector. The second type of melt electrospun fiber were poor quality, large diameter fibers, flattened on the collector – termed “molten fibers”. The solid and molten fibers were morphologically distinct from each other as determined from scanning electron microscopy (SEM). Using an SEM imaging method to assess the regional variations of collected electrospun material, we found the spinneret pump rate largely influenced the fiber quality. The polymer flow rate to the spinneret and the molecular weight of PEG‐b‐PCL had the greatest effect on the electrospun fibers collected, with an optimum rate of 0.05–0.1 mL/h for the highest molecular weight copolymers. The lowest molecular weight PEG‐b‐PCL tended to electrospray, while the material collected from higher molecular weight copolymers were conducive to fiber formation. The highest quality fibers were PEG‐b‐PCL block copolymers (22 000 and 26 900 g/mol) melt electrospun at temperatures of 85°C and 90°C, corresponding to shear viscosities of the polymer of between 28.1 and 39.4 Pa.S.Keywords
This publication has 27 references indexed in Scilit:
- Direct in Vitro Electrospinning with Polymer MeltsBiomacromolecules, 2006
- Microintegrating smooth muscle cells into a biodegradable, elastomeric fiber matrixBiomaterials, 2006
- Formation of a Unique Crystal Morphology for the Poly(ethylene glycol)−Poly(ε-caprolactone) Diblock CopolymerBiomacromolecules, 2005
- Electrospun chitosan-based nanofibers and their cellular compatibilityBiomaterials, 2005
- Melt-electrospinning part I: processing parameters and geometric propertiesPolymer, 2004
- Degradation and cell culture studies on block copolymers prepared by ring opening polymerization of ϵ‐caprolactone in the presence of poly(ethylene glycol)Journal of Biomedical Materials Research Part A, 2004
- Cellular Internalization of Poly(ethylene oxide)-b-poly(ε-caprolactone) Diblock Copolymer MicellesBioconjugate Chemistry, 2002
- PCL-b-PEO Micelles as a Delivery Vehicle for FK506: Assessment of a Functional Recovery of Crushed Peripheral NerveDrug Delivery, 2000
- Synthesis and thermal properties of poly(ethylene glycol)-poly(ϵ-caprolactone) copolymersPolymer, 1998
- Electrostatic fiber spinning from polymer melts. I. Experimental observations on fiber formation and propertiesJournal of Polymer Science: Polymer Physics Edition, 1981