Catalog of NIMS creep data sheets
Open Access
- 31 December 2019
- journal article
- research article
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 20 (1) , 1131-1149
Abstract
The background of the NIMS Creep Data Sheet Project, together with the preliminary study and facilities, material selection, and testing method are summarized. The outcomes from the project are explained, focusing on the long-term creep strength of ferritic and austenitic heat-resistant steels. In some cases, the slope of the stress versus time-to-rupture curve in the long term differed from that in the short term in a manner that was markedly dependent on the type of material. Heat-to-heat variations in creep strength were recognized for ferritic and austenitic steels, even when the chemical compositions of the steels examined were within the range of specifications. The reasons for the heat-to-heat variations were differences in the chemical composition, in the amounts of minor elements, and in the grain size, among others. The existence of inherent creep strength was discovered in the very long term for ferritic heat-resistant steels. The amounts of minor solute elements affect the inherent creep strength, independently of precipitation strengthening or the dislocation structure. An inflection point was observed in the tertiary creep stage for a low-alloy steel and for austenitic stainless steels when precipitation occurred during creep. A region-splitting analysis method was proposed for long-term creep strength evaluation for high-chromium ferritic steels. This method was used to review the allowable stress of high-chromium ferritic steels in Japan. A metallographic atlas, time–temperature–precipitation diagram, and fracture-mode map were proposed for ferritic and austenitic steels on the basis of creep-ruptured specimens.Keywords
This publication has 22 references indexed in Scilit:
- Heat-to-heat variation of creep strength and long-term stability of microstructure in Grade 91 steelsMaterials Science and Engineering: A, 2014
- Heat-to-heat variation in long-term creep strength of some ferritic steelsInternational Journal of Pressure Vessels and Piping, 2010
- Precipitate design for creep strengthening of 9% Cr tempered martensitic steel for ultra-supercritical power plantsScience and Technology of Advanced Materials, 2008
- Improvement of Creep Life Prediction of High Cr Ferritic Creep Resistant Steels by Region Partitioning Method of Stress vs. Time to Rupture DiagramJournal of the Society of Materials Science, Japan, 2003
- Improved Utilization of Added B in 9Cr Heat-Resistant Steels Containing WISIJ International, 2002
- Microstructural evolution and change in hardness in type 304H stainless steel during long-term creepMaterials Science and Engineering: A, 2001
- Advances in Physical Metallurgy and Processing of Steels. Strengthening Mechanisms of Creep Resistant Tempered Martensitic Steel.ISIJ International, 2001
- The effect of carbide distributions on long-term creep rupture strength of SUS321H and SUS347H stainless steelsMaterials Science and Engineering: A, 1997
- Effect of prior austenite grain size on high temperature creep properties of CrMoV rotor steelScripta Metallurgica, 1987
- Long-Term Creep Rupture Testing at NRIMJournal of the Society of Materials Science, Japan, 1973