An advanced self‐lubricating ceramic composite with the addition of core‐shell structured CaF 2 @Al 2 O 3 powders
Authors:
- 15 September 2018
- journal article
- research article
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 16 (2) , 753-760
Abstract
Aiming to improve the performance of self‐lubricating ceramic tools, an advanced self‐lubricating ceramic composite was developed. Core‐shell structure CaF 2 @Al 2 O 3 powders were synthesized by liquid‐phase non‐uniform nucleation method. Al 2 O 3 /Ti(C,N)/CaF 2 @Al 2 O 3 composite made by adding CaF 2 @Al 2 O 3 powders exhibited notable improvements in microstructure and mechanical properties as compared with Al 2 O 3 /Ti(C,N)/CaF 2 composite made by adding uncoated CaF 2 powders. The core‐shell coated self‐lubricating ceramic tool with different content of CaF 2 @Al 2 O 3 was designed and prepared by hot pressing sintering process. The results show that when the content of CaF 2 @Al 2 O 3 is 10 vol%, The composite has the best mechanical properties, the flexural strength, and the fracture toughness and the hardness is 680 MPa, 6.50 MPa·m 1/2 , and 17.29 GPa. Compared with the tool material with only CaF 2 solid lubricant added, the above performances were increased by 8.91%, 29.48%, and 14.50% respectively. The influence of different CaF 2 @Al 2 O 3 content on the physical and mechanical properties and microstructure of the tool material was analyzed.Keywords
Funding Information
- Natural Science Foundation of Shandong Province (ZR2017LEE014)
This publication has 19 references indexed in Scilit:
- Self-lubricating ceramic cutting tool material with the addition of nickel coated CaF2 solid lubricant powdersInternational Journal of Refractory Metals and Hard Materials, 2016
- High-Temperature Self-Lubricated and Fracture Properties of Alumina/Molybdenum Fibrous Monolithic CeramicTribology Letters, 2015
- The effect of TiO2 nanopowder coating on in vitro bioactivity of porous TiO2 scaffoldsMaterials Letters, 2015
- Laminated structure optimization and drawing performance of Al2O3–TiC/Al2O3–TiC–CaF2 self-lubricating laminated ceramic conical dieCeramics International, 2015
- The origins of chemomechanical effects in the low-load indentation hardness and tribology of ceramic materialsJournal of Materials Science, 2015
- Porous ceramic materials by pore-forming agent method: An intermingled fractal units analysis and procedure to predict thermal conductivityCeramics International, 2015
- Low power loss and field-insensitive permeability of Fe-6.5%Si powder cores with manganese oxide-coated particlesJournal of Applied Physics, 2015
- Al2O3/(W,Ti)C/CaF2 multi-component graded self-lubricating ceramic cutting tool materialInternational Journal of Refractory Metals and Hard Materials, 2014
- Development of Multicomponent Graded Self-lubricating Ceramic Cutting Tool MaterialsJournal of Mechanical Engineering, 2014
- Self-lubrication of sintered ceramic tools with CaF2 additions in dry cuttingInternational Journal of Machine Tools and Manufacture, 2006