In‐plane and out‐of‐plane behavior of confined masonry walls for various toothing and openings details and prediction of their strength and stiffness
- 21 July 2016
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 45 (15) , 2551-2569
Abstract
Summary: Eight half‐scale brick masonry walls were tested to study two important aspects of confined masonry (CM) walls related to its seismic behavior under in‐plane and out‐of‐plane loads. Four solid wall specimens tested to investigate the role of type of interface between the masonry and tie‐columns, such as toothing varying from none to every course. The other four specimens with openings were tested to study the effectiveness of various strengthening options around opening to mitigate their negative influence. In the set of four walls, one wall was infilled frame while the other three were CM walls of different configurations. The experimental results were further used to determine the accuracy of various existing models in predicting the in‐plane response quantities of CM walls.Confined masonry walls maintained structural integrity even when severely damaged and performed much better than infill frames. No significant effect of toothing details was noticed although toothing at every brick course was preferred for better post‐peak response. For perforated walls, provision of vertical elements along with continuous horizontal bands around openings was more effective in improving the overall response. Several empirical and semi‐empirical equations are available to estimate the lateral strength and stiffness of CM walls, but those including the contribution of longitudinal reinforcement in tie‐columns provided better predictions. The available equations along with reduction factors proposed for infills could not provide good estimates of strength and stiffness for perforated CM walls. However, recently proposed relations correlating strength/stiffness with the degree of confinement provided reasonable predictions for all wall specimens. Copyright © 2016 John Wiley & Sons, Ltd.Keywords
This publication has 18 references indexed in Scilit:
- Sub‐Paneling of Masonry Walls Using Precast Reinforced Concrete Elements for Earthquake ResistanceEarthquake Spectra, 2014
- Seismic Behavior of Framed Masonry Panels with Prior Damage When Subjected to Out‐of‐Plane LoadingEarthquake Spectra, 2011
- Investigation on the behavior of brick-infilled steel frames with openings, experimental and analytical approachesEngineering Structures, 2011
- Backbone Model for Confined Masonry Walls for Performance-Based Seismic DesignJournal of Structural Engineering, 2009
- Lateral Stiffness of Masonry Infilled Reinforced Concrete (RC) Frames with Central OpeningEarthquake Spectra, 2008
- SHEAR CAPACITY PREDICTION OF CONFINED MASONRY WALLS SUBJECTED TO CYCLIC LATERAL LOADINGDoboku Gakkai Ronbunshuu A, 2008
- Bidirectional Behavior of Structural Clay Tile Infilled FramesJournal of Structural Engineering, 1999
- Resistance-Deflection Functions for Concrete Wall Panels with OpeningsJournal of Structural Engineering, 1998
- Seismic behaviour of confined masonry wallsEarthquake Engineering & Structural Dynamics, 1997
- Verification of seismic resistance of confined masonry buildingsEarthquake Engineering & Structural Dynamics, 1997