Investigation of controlling factors on toxic metal leaching behavior in municipal solid wastes incineration fly ash
Authors:
- 8 August 2019
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 26 (28) , 29316-29326
Abstract
Municipal solid wastes incineration (MSWI) fly ash has drawn worldwide attention for its substantial annual generation capacity and high toxic metals leachability. Although many factors have been shown to affect the leachability of metals in fly ash, the controlling factors, which guide the selection of appropriate risk reduction method, remain unclear. The purpose of this study was to evaluate the effects of the two most important factors, total metal content, and remaining alkaline substances of MSWI fly ash, on the leaching behavior of toxic metals. In this work, a series of leaching tests and sequential extraction procedures were performed for seven fly ash samples collected from one MSWI plant. Results show that particulate size distribution, morphology, and mineralogy of all samples are similar, indicating the effects of these properties on metal leaching behavior can be ignored. In leaching tests, although the leaching behavior in terms of metal species and concentration levels vary as expected, only the leachate Pb concentration in four samples (up to 17.32 mg/L) exceeds the threshold in Chinese regulation (0.25 mg/L). The variation of the leachate Pb concentration is not consistent with the change of the total Pb concentration in fly ash. Further correlation analysis evidences that the acid-soluble Pb, which is highly correlated to the calcium content of fly ash, dominates the concentration of leachate Pb. Notably, when the addition of lime is about 1.5 times over the theoretical value, the concentration of leachate Pb would exceed the threshold regardless of the total Pb concentration in fly ash. Overall, this study demonstrates that the remaining alkaline substances (mainly calcium-bearing compounds), rather than the total content of metals, are the controlling factor of metal leaching behavior in fly ash. Thus, strategies to delicately optimize the quantity of lime addition in acid gas purification process should be considered to minimize MSWI fly ash environmental risks in the future.Keywords
Funding Information
- Shenzhen Municipal Science and Technology Innovation Committee (JSGG20160429191853857)
- National key research and development program (2018YFC1902904)
- Risk and Remediation of Heavy Metals Polluted Agricultural Soil (2016YFE0106400)
This publication has 52 references indexed in Scilit:
- Sustainable stabilization/solidification of municipal solid waste incinerator fly ash by incorporation of green materialsJournal of Cleaner Production, 2019
- Characterization of naturally aged cement-solidified MSWI fly ashWaste Management, 2018
- Quantification of main and trace metal components in the fly ash of waste-to-energy plants located in Germany and Switzerland: An overview and comparison of concentration fluctuations within and between several plants with particular focus on valuable metalsWaste Management, 2018
- Carbon footprint associated with four disposal scenarios for urban pruning wasteEnvironmental Science and Pollution Research, 2017
- Comparison of different MSWI fly ash treatment processes on the thermal behavior of As, Cr, Pb and Zn in the ashWaste Management, 2017
- Material characterization of the MSWI bottom ash as a function of particle size. Effects of glass recycling over timeScience of The Total Environment, 2017
- Waste to energy – key element for sustainable waste managementWaste Management, 2015
- Element composition and mineralogical characterisation of air pollution control residue from UK energy-from-waste facilitiesWaste Management, 2015
- Removal of chloride from MSWI fly ashJournal of Hazardous Materials, 2012
- Belgian MSWI fly ashes and APC residues: A characterisation studyWaste Management, 2012