Dual Use of Copper-Modified TiO2 Nanotube Arrays as Material for Photocatalytic NH3 Degradation and Relative Humidity Sensing
Open Access
Abstract
In this paper, we emphasized the dual application of Cu-modified vertically aligned TiO2 nanotube arrays as photocatalyst and a relative humidity sensor. The TiO2 nanotube arrays were obtained by anodization of the titanium layer prepared using radio frequency magnetron sputtering (RFMS) and modified with different copper concentrations (0.5, 1, 1.5, and 2 M) by a wet-impregnation method. The sample modified with 2 M Cu(NO3)2 solution showed the highest efficiency for the NH3 photocatalytic degradation and the most pronounced humidity response in comparison to the other studied samples. In order to investigate the structure and impact of Cu modification, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) were used. The photocatalytic activity and the kinetic study of ammonia oxidation were studied in a mini-photocatalytic wind tunnel reactor (MWPT), while relative humidity sensing was examined by impedance spectroscopy (IS). Higher NH3 oxidation was a direct consequence of the increased generation of •OH radicals obtained by a more efficient photogenerated charge separation, which is correlated with the increase in the DC conductivity.Keywords
Funding Information
- Hrvatska Zaklada za Znanost (HrZZ-IP-2018-01-5246)
- Centre of excellence for Advanced Materials and SEnsing Devices (KK.01.1.1.01.0001)
- Waste & Sun for photocatalytic degradation of micropollutants in water (KK.01.1.1.04.0006)
- Recycled rubber & Solar photocatalysis: an innovation for passive air and health protection (KK.01.1.1.07.0058)
This publication has 40 references indexed in Scilit:
- Plasmonic photocatalysis properties of Au nanoparticles precipitated anatase/rutile mixed TiO2 nanotubesNanoscale, 2013
- Removal of NO by photocatalytic processesJournal of Photochemistry and Photobiology C: Photochemistry Reviews, 2013
- Photocatalytic oxidation of trimethylamine and isovaleraldehyde in an annular reactor: Influence of the mass transfer and the relative humidityJournal of Photochemistry and Photobiology A: Chemistry, 2012
- Reaction Mechanism of Ammonia Decomposition to Nitrogen and Hydrogen over Metal Loaded Titanium Oxide PhotocatalystThe Journal of Physical Chemistry C, 2012
- Preparation and Characterization of Cu Loaded TiO2 Nanotube Arrays and their Photocatalytic ActivityAdvanced Materials Research, 2011
- Photocatalytical Properties of TiO2 NanotubesSolid State Phenomena, 2010
- Improved and excellent CO sensing properties of Cu-doped TiO2 nanofibersChinese Science Bulletin, 2010
- Anodic Formation of Ordered TiO2 Nanotube Arrays: Effects of Electrolyte Temperature and Anodization PotentialThe Journal of Physical Chemistry C, 2009
- Combined effects of external mass transfer and biodegradation rates on removal of phenol by immobilized Ralstonia eutropha in a packed bed reactorJournal of Hazardous Materials, 2008
- Kinetic analysis on photocatalytic degradation of gaseous acetaldehyde, ammonia and hydrogen sulfide on nanosized porous TiO2filmsScience and Technology of Advanced Materials, 2007