Criteria for Crack Branching in Cylindrical Rods: II, Flexure
Authors:
- 1 June 1987
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 70 (6) , 419-425
Abstract
The angular and radial dependencies of the mirror‐mist and mist‐hackle boundaries predicted by the stress intensity criterion for crack branching were compared with those of experimentally determined boundaries in cylindrical specimens fractured in flexure. The analysis models the reduction of branching radii near the surface caused by reduced constraint and the elongation toward the neutral axis caused by the stress distribution except that it underestimates the elongation in a range of angles for specimens fractured at relatively low stresses. This difference is believed to result from changes in crack shape that are not accounted for in the analysis. As in the case of rectangular bars fractured in tension and flexure and cylindrical rods fractured in tension, the stress intensity criterion continues to provide better predictions than the Johnson and Holloway criterion.Keywords
This publication has 9 references indexed in Scilit:
- Criteria for Crack Branching in Cylindrical Rods: I, TensionJournal of the American Ceramic Society, 1987
- Brittleness Dependence of Crack Branching in CeramicsJournal of the American Ceramic Society, 1986
- Stress-intensity Factors for Circumferential Surface Cracks in Pipes and Rods under Tension and Bending Loads1986
- Criterion for Fracture‐Mirror Boundary Formation in CeramicsJournal of the American Ceramic Society, 1980
- Fracture Mechanics of Fracture MirrorsJournal of the American Ceramic Society, 1979
- Investigations of the crack branching energyInternational Journal of Fracture, 1975
- Crack branching in Homalite-100 sheetsEngineering Fracture Mechanics, 1974
- Stress Intensity Factors for Semicircular Cracks: Part 2—Semi-Infinite SolidJournal of Applied Mechanics, 1967
- On the shape and size of the fracture zones on glass fracture surfacesPhilosophical Magazine, 1966