Characterization and fault diagnosis of vibration characteristics of tenon disks with cracks based on blade tip timing
- 8 January 2025
- journal article
- research article
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (2) , 025010
Abstract
The tenon-structured disk is a critical component of the rotor system in aeroengines. Under the repeated cyclic loads and inherent material defects, the disk is susceptible to the initiation of fatigue cracks. The impact of disk cracks on the shaft vibration response is subtle and challenging to monitor, however, it can induce periodic vibrations in the blades near the crack location. Therefore, this paper proposes a method for crack identification in rotor disks based on blade tip timing technology, which allows for the reflection of rotor disk crack parameters (type, location) through the blade tip vibration parameters, enabling online monitoring and fault diagnosis of rotor disk cracks. To guide the implantation of cracks, this study analyzes the weak points of the disk and conducts a comparative analysis of the effects of cracks of different depths on the blade tip vibration characteristics. Experimental validation confirms the accuracy of the proposed method, providing theoretical support for the onboard online identification of cracks in aeroengine disks.Keywords
Funding Information
- National Natural Science Foundation of China (52175090)
This publication has 18 references indexed in Scilit:
- DSTF-Net: A novel framework for intelligent diagnosis of insulated bearings in wind turbines with multi-source data and its interpretabilityRenewable Energy, 2024
- The STAP-Net: A new health perception and prediction framework for bearing-rotor systems under special working conditionsReliability Engineering & System Safety, 2024
- The LPST-Net: A new deep interval health monitoring and prediction framework for bearing-rotor systems under complex operating conditionsAdvanced Engineering Informatics, 2024
- Phase-offset-based synchronous resonance identification method for blade tip timing signalMeasurement, 2023
- Research on the identification of asynchronous vibration parameters of rotating blades based on blade tip timing vibration measurement theoryMeasurement, 2022
- An improved mistuning identification and dynamic strain prediction method for rotating blades with application of blade tip timing technologyMechanical Systems and Signal Processing, 2022
- Blade tip characteristics of turbine disks with cracksEngineering Failure Analysis, 2022
- A comprehensive review on blade tip timing-based health monitoring: status and futureMechanical Systems and Signal Processing, 2021
- Sparse reconstruction of blade tip-timing signals for multi-mode blade vibration monitoringMechanical Systems and Signal Processing, 2016
- Non-contact crack detection of high-speed blades based on principal component analysis and Euclidian angles using optical-fiber sensorsSensors and Actuators A: Physical, 2013