Effect of printing parameters on characteristic and properties PLA/Fe2O3 and CPLA/Fe2O3 composites using FDM techniques

Authors:
  • SCSong Cheah Chie
    Song Cheah Chie
  • NMNor Shahira Shahkila Mansor
    Nor Shahira Shahkila Mansor
  • YKYeoh Cheow Keat
    Yeoh Cheow Keat
  • TATan Mei Ai
    Tan Mei Ai
  • TLTeh Pei Leng
    Teh Pei Leng
  • KWKam Ka Wei
    Kam Ka Wei

Abstract
PLA has become high interest in the production process. Besides, PLA as a thermoplastic polyester that mostly obtained from renewable materials. Infill patterns can affect the mechanical properties of 3D printed CPLA-Fe2O3 and PLA-Fe2O3. Concentric infill pattern of both CPLA-Fe2O3 and PLA-Fe2O3 have the highest tensile strength value, 55.42MPa and 50.44MPa respectively as compared to grid and zigzag infill pattern. The consistent adhesion between the layers and the inter raster bonding cause the concentric infill pattern experience highest tensile strength and also can cause the lowest elongation at break, 2.06% and 5.80% respectively for both CPLA-Fe2O3 and PLA-Fe2O3, compared to zigzag and grid infill pattern of specimens. The 100% infill density of both CPLA-Fe2O3 and PLA-Fe2O3 have the highest tensile strength value, 55.42MPa and 50.44MPa respectively as compared to 80% and 90% infill densities. It was believed that the higher the infill density, the stronger the inter raster bonding and less air gap between printed layers. 80% infill density of CPLA-Fe2O3 has the highest elongation at break value, 4.98% as compare to 90% and 100% which were 3.46% and 2.16% respectively. Besides, 100% infill density and grid infill pattern have the highest hardness value which they able to withstand the force applied before deformation. As for application, 3D printed PLA-Fe2O3 and CPLA-Fe2O3 can be applied in packaging, pharmaceuticals, textiles, automotive, biomedical and tissue engineering.

This publication has 14 references indexed in Scilit: