Characterizing the Stormwater Runoff Quality and Evaluating the Performance of Curbside Infiltration Systems to Improve Stormwater Quality of an Urban Catchment
Open Access
Abstract
The conveyance of stormwater has become a major concern for urban planners, considering its harmful effects for receiving water bodies, potentially disturbing their ecosystem. Therefore, it is important to characterize the quality of catchment outflows. This information can assist in planning for appropriate mitigation measures to reduce stormwater runoff discharge from the catchment. To achieve this aim, the article reports the field data from a typical urban catchment in Australia. The pollutant concentration from laboratory testing is then compared against national and international reported values. In addition, a stochastic catchment model was prepared using MUSIC. The study in particular reported on the techniques to model distributed curbside leaky wells with appropriate level of aggregation. The model informed regarding the efficacy of distributed curbside leaky well systems to improve the stormwater quality. The results indicated that catchment generated pollutant load, which is typical of Australian residential catchments. The use of distributed storages only marginally improves the quality of catchment outflows. It is because ability of distributed leaky wells depended on the intercepted runoff volume which is dependent on the hydrological storage volume of each device. Therefore, limited storage volume of current systems resulted in higher contributing area to storage ratio. This manifested in marginal intercepted volume, thereby only minimum reduction in pollutant transport from the catchment to outlet. Considering strong correlation between contributing impervious area and runoff pollutant generation, the study raised the concern that in lieu of following the policy of infill development, there can be potential increase in pollutant concentration in runoff outflows from Australian residential catchments. It is recommended to monitor stormwater quality from more residential catchments in their present conditions. This will assist in informed decision-making regarding adopting mitigations measures before considering developments.Keywords
This publication has 25 references indexed in Scilit:
- Water Sensitive Urban Design: An Investigation of Current Systems, Implementation Drivers, Community Perceptions and Potential to Supplement Urban Water ServicesWater, 2016
- Valuing coastal water quality: Adelaide, South Australia metropolitan areaMarine Policy, 2015
- SUDS, LID, BMPs, WSUD and more – The evolution and application of terminology surrounding urban drainageUrban Water Journal, 2014
- A critical review of integrated urban water modelling – Urban drainage and beyondEnvironmental Modelling & Software, 2014
- Modelling Interactions Between Lot-Scale Decentralised Water Infrastructure and Urban Form – a Case Study on Infiltration SystemsWater Resources Management, 2013
- Modelling the impact of soakaway retrofits on combined sewage overflows in a 3 km2 urban catchment in Copenhagen, DenmarkJournal of Hydrology, 2012
- Hydrologic shortcomings of conventional urban stormwater management and opportunities for reformLandscape and Urban Planning, 2012
- New Insights into the Quality of Urban Storm Water in South Eastern AustraliaJournal of Environmental Engineering, 2010
- Effect of Aggregation of On-Site Storm-Water Control Devices in an Urban Catchment ModelJournal of Hydrologic Engineering, 2009
- Analysis of parameter uncertainty of a flow and quality stormwater modelWater Science & Technology, 2009