Adsorption of trivalent chromium from aqueous solutions onto activated carbon
- 1 January 1995
- journal article
- research article
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 62 (1) , 64-67
Abstract
The adsorption of chromium (III) onto activated carbon was investigated as a possible alternative method for its removal from aqueous solutions. The adsorption data were obtained in a batch adsorber and fitted the Langmuir adsorption isotherm well. The effect of pH on the adsorption isotherm was investigated at pH values of 2, 4, 5 and 6. It was found that at pH values below 2 the Cr(III) was not adsorbed and at pH values above 6.4 the Cr(III) was precipitated as Cr(OH)3. Maximum adsorption occurred at pH 5. The pH plays a very important role in the adsorption of Cr(III) since Cr(III) can form different complexes in aqueous solutions. The adsorption capacity was increased by about 20% as the temperature was raised from 25 to 40°C. It was concluded that Cr(III) is adsorbed to an appreciable extent on activated carbon and that the adsorption is highly dependent upon pH.Keywords
This publication has 6 references indexed in Scilit:
- Comparison of methods to assess surface acidic groups on activated carbonsAnalytical Chemistry, 1992
- A bench study on chromium recovery from tannery sludgeWater Research, 1991
- Use of Coconut Shell-Based Activated Carbon for Chromium (VI) RemovalWater Science & Technology, 1989
- Chromium(III) hydrolysis constants and solubility of chromium(III) hydroxideInorganic Chemistry, 1987
- Removal of Cr(V1) from aqueous solutions by adsorption on fly ash‐wollastoniteJournal of Chemical Technology and Biotechnology. Chemical Technology, 1984
- The removal of chromium(VI) from dilute aqueous solution by activated carbonWater Research, 1977