A Multidisciplinary Numerical Modeling Tool Integrating CFD and Thermal System Simulation for Automotive HVAC System Design
Author:
- 16 April 2012
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
A multidisciplinary toolset integrating ANSYS FLUENT CFD solver and GM in-house thermal system design tool - e-Thermal has been developed to design automotive HVAC systems. This toolset utilizes COM software interface standard of MS Windows for inter-process communication at simulation run-time to synchronize the two applications and to exchange data. In this report, first, the implementation of this fully transient, coupled method between FLUENT CFD and e-Thermal is introduced. We then apply this integrated tool to simulate a transient A/C operating cycle including hot-soak and cool-down of a cabin. The coupled simulation consists of an A/C and an Air-Handling (HVAC module) system models, and a cabin CFD model. It demonstrates that the coupled method can simulate fully transient HVAC system operations in a vehicle. This coupled method enables right-sizing HVAC systems against realistic transient operations instead of peak operations to reduce compressor load, thus to achieve overall fuel economy improvement. On the other hand, the CFD model in this report is part of a coupled system simulation involving multiple 1-D or 3-D modeling components. A rapid 3-D coarse CFD calculation is employed based on simplified cabin geometry to predict overall temperature distribution. In addition to transient mass, momentum and energy solution, it also solves for transient species transport of dry air and water vapor mixture for the humidity effect of the cabin air. The CFD prediction of the peak air temperature during the hot-soak is validated against a published test result.Keywords
This publication has 10 references indexed in Scilit:
- Assessment of Various Environmental Thermal Loads on Passenger Compartment Soak and Cool-down AnalysesSAE International Journal of Advances and Current Practices in Mobility, 2009
- Customizable Multidiscipline Environments for Heat Transfer and Fluid Flow ModelingSAE International Journal of Advances and Current Practices in Mobility, 2004
- e-Thermal: A Vehicle-Level HVAC/PTC Simulation ToolSAE International Journal of Advances and Current Practices in Mobility, 2004
- e-Thermal: Automobile Air-Conditioning ModuleSAE International Journal of Advances and Current Practices in Mobility, 2004
- Effects of the Solar Reduction Glass on the Car Occupant's Thermal Comfort by a Numerical SimulationSAE International Journal of Advances and Current Practices in Mobility, 2003
- Effects of Spectral Properties of Glass on Thermal Comfort of Car OccupantsSAE International Journal of Advances and Current Practices in Mobility, 2003
- Integrated Numerical Modeling Process for Evaluating Automobile Climate Control SystemsSAE International Journal of Advances and Current Practices in Mobility, 2002
- Numerical Comfort Simulator for Thermal Environment (Part 2) An Application of Simulator for the Evaluation of Solar Reduction Glass in a Vehicle ModelSAE International Journal of Advances and Current Practices in Mobility, 2002
- Optimization of Vehicle Air Conditioning Systems Using Transient Air Conditioning Performance AnalysisSAE International Journal of Advances and Current Practices in Mobility, 2001
- Design and Transient Simulation of Vehicle Air Conditioning SystemsSAE International Journal of Advances and Current Practices in Mobility, 2001