Mechanical properties of hollow glass waveguides
Authors:
- 1 September 1999
- journal article
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 38 (9) , 1490-1499
Abstract
Hollow glass waveguides with losses as low as 0.2 dB/m at the 10.6 μm are an attractive fiber delivery system for a broad range of IR wavelengths. These guides are made by depositing, using liquid-phase chemistry methods, silver and silver iodide films on the inside of silica tubing. The wet-chemistry techniques used in the process reduce somewhat the mechanical properties of the hollow-silica guides compared to the uncoated tubing used to make the guides. In particular, the mean failure stress is reduced from 8.4 GPa for uncoated, as-drawn, 530-μm bore silica tubing to 6.12 GPa for the Ag/AgI coated, 530-μm bore waveguide. In addition, the Weibull modulus decreases from 96.9 to 17. This means that the bending radius of the hollow guides, which is inversely proportional to the mean failure stress, increases from about 1 to about 1.5 cm. The reason for the decrease in strength for the processed tubing is the slow reaction of the aqueous coating solutions with the silica surface. Nevertheless, the bending radii for the guides is still quite small and the fatigue behavior of the guides, as measured by the crack growth parameter n, is essentially the same for processed or uncoated tubing. © 1999 Society of Photo-Optical Instrumentation Engineers.Keywords
This publication has 20 references indexed in Scilit:
- Evaluation of gold, silver, and dielectric‐coated hollow glass waveguidesOptical Engineering, 1996
- Review of hollow waveguide technology1995
- Small-bore hollow waveguide for delivery of nearsinglemode IR laser radiationElectronics Letters, 1994
- Hollow glass waveguides for broadband infrared transmissionOptics Letters, 1994
- Effect of Loading Mode and Coating on Dynamic Fatigue of Optical Fiber in Two‐Point BendingJournal of the American Ceramic Society, 1993
- Bending losses and beam profiles of zinc selenide-coated silver waveguides for carbon dioxide laser lightApplied Optics, 1992
- Characterization of hollow fibers for the transmission of infrared radiationApplied Optics, 1990
- Strength and fatigue of silica optical fibersJournal of Lightwave Technology, 1989
- Strength Measurement of Optical Fibers by BendingJournal of the American Ceramic Society, 1986
- A Molecular Mechanism for Stress Corrosion in Vitreous SilicaJournal of the American Ceramic Society, 1983