Adiabatically Bent Waveguides on Silicon Nitride Photonics for Compact and Dense Footprints
Authors:
- 28 June 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 28 (20) , 2164-2167
Abstract
Low-loss bent waveguides drawn by an adiabatic profile with an offset at the interface between a bent and straight waveguides have been proposed, optimally designed, and experimentally evaluated for silicon nitride waveguide platforms, which compactness and high density are required. The profile is sinusoidal which can gradually increase the waveguide width up to 45° and then decrease the width up to 90° symmetrically. By employing the profile, modal confinement is increased and bending loss is decreased simultaneously. As a result of experimental evaluation, the characteristics of bending loss are improved. For instance, 0.215-dB/90° bending loss has been achieved at 5 μm radius. The loss of this bend is 0.4 dB/90° lower than that of a conventional bend. We also investigated bends when using a C-band light source theoretically. Less than 0.6 dB/90° bending loss has been shown using 3-D finite-difference time-domain simulations at 20 μm radius. Thus, it can be used in various applications using visible and infrared lights to reduce the device footprint.Keywords
This publication has 11 references indexed in Scilit:
- Silicon and hybrid silicon photonic devices for intra-datacenter applications: state of the art and perspectives [Invited]Photonics Research, 2015
- Microscope-on-chip: combining lens-free microscopy with integrated photonics2015
- Focusing Grating Couplers in Unmodified 180-nm Silicon-on-Insulator CMOSIEEE Photonics Technology Letters, 2014
- Low-Loss Singlemode PECVD Silicon Nitride Photonic Wire Waveguides for 532–900 nm Wavelength Window Fabricated Within a CMOS Pilot LineIEEE Photonics Journal, 2013
- Passive Photonics in an Unmodified CMOS Technology With No Post-Processing RequiredIEEE Photonics Technology Letters, 2013
- Silicon PhotonicsJournal of Lightwave Technology, 2006
- Analysis of characteristics of bent rib waveguidesJournal of the Optical Society of America A, 2004
- Losses in single-mode silicon-on-insulator strip waveguides and bendsOptics Express, 2004
- Confinement and modal gain in dielectric waveguidesJournal of Lightwave Technology, 1996
- Bending loss reduction in silica-based waveguides by using lateral offsetsJournal of Lightwave Technology, 1995