3D Printed Linearly Polarized X-Band Conical Horn Antenna and Lens
Open Access
- 6 May 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 3, 549-556
Abstract
A fast and convenient method to 3D print and metalize circular waveguide components is demonstrated using polylactic acid (PLA) and aluminum adhesive backed tape. A gradient index (GRIN) lens, an externally metalized thin-walled conical horn, and a WR90 rectangular to linearly polarized circular waveguide transition are simulated, fabricated, and measured. The horn and lens were both monolithic prints that were externally metallized to simplify the metallization process. Both the horn and lens have a measured operational bandwidth of 8.2 GHz to 12.4 GHz with an input reflection less than −15 dB and peak gain of 18.7 dBi at mid-band. The walls of the thin-wall horn are printed at a thickness such that the dielectric layer does not impact the performance of the horn while being robust enough to support external metallization. The lensed horn functioned as the support for the aluminum foil while also improving the radiation pattern by improving the $\vec {E}$ SLL by up to 15 dB compared to the thin-walled horn antenna.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada (RGPIN-2022-05204)
This publication has 24 references indexed in Scilit:
- 3-D-Printed Comb Mushroom-Like Dielectric Lens for Stable Gain Enhancement of Printed Log-Periodic Dipole ArrayIEEE Antennas and Wireless Propagation Letters, 2018
- 3D printed circular and rectangular waveguide mode converters2018
- PLA-based 3D printed circularly polarized X-band horn array antenna for CP-SAR sensor2018
- Simple High-Performance Metal-Plating Procedure for Stereolithographically 3-D-Printed Waveguide ComponentsIEEE Microwave and Wireless Components Letters, 2017
- Lightweight Perforated Waveguide Structure Realized by 3-D Printing for RF ApplicationsIEEE Transactions on Antennas and Propagation, 2017
- Exponential Antipodal Vivaldi Antenna With Exponential Dielectric LensIEEE Antennas and Wireless Propagation Letters, 2017
- Ka band 3D printed horn antennas2017
- 3-D Inkjet-Printed Helical Antenna with Integrated LensIEEE Antennas and Wireless Propagation Letters, 2016
- Characterization of a 3D printed wideband waveguide and horn antenna structure embedded in a UAV wing2016
- A simple circular-to-rectangular waveguide transitionIEEE Microwave and Wireless Components Letters, 2005