Recovery of cellulose nanocrystal from mixed office wastepaper and the development of bio-based coating matrixes with enhanced water, gas, oil, and grease resistances for packaging
Open Access
- 22 April 2025
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (17) , 13188-13198
Abstract
This study on sustainable nanocellulose modifications for various packaging applications is driven by the global social awareness and growing demand for bioproducts to reduce the use of single-use plastics. Mixed office waste (MOW) was used as the raw material to extract cellulose nanocrystals (CNCs) via the acid hydrolysis method. The average length and diameter of the CNCs were approximately 104.08 ± 0.1 nm and 9.49 ± 0.3 nm, respectively. The crystallinity index was 87%, as confirmed using transmission electron microscopy and X-ray diffraction analysis. Coating solutions of varying concentrations were prepared by mixing CNCs with collagen hydrolysate and glycerin, and the coatings were applied to the surface of uncoated paper via a rod coating process. FTIR spectra confirmed the presence of CNCs in the coated paper. High-resolution FE-SEM images provided detailed information on the surface morphology of the coated papers. The barrier and mechanical performances of the coated paper were evaluated using the oil and grease resistance KIT, hot oil, water vapor permeability, air permeability, water contact angle, tensile index, burst index, percentage of elongation, and fold tests. All the coated paper samples passed the hot oil test and exhibited the highest KIT rating. The water vapor and air resistance values of the coated paper samples increased 14 times and 250 times, respectively, compared with the uncoated paper samples. The water contact angle of the coated paper samples increased to 99.40° from 60.13°, and the surface roughness decreased from 2.37 μm to 0.85 μm. The presence of coating also increased the tensile and burst indices by 5.28 times and 1.79 times, respectively, compared with the uncoated paper samples. No cytotoxic effects were found in the optimized coated paper, and all the samples were fully degraded within 49 days, as confirmed using the soil biodegradability test. Therefore, the coated paper can be a potential alternative to existing single-use plastics for packaging materials.Keywords
Funding Information
- Ministry of Education, Government of the People's Republic of Bangladesh (ET-20222100)
This publication has 36 references indexed in Scilit:
- Upcycling Leather and Paper Wastes to Biodegradable Materials for Packaging Displaying Excellent Multifunctional Barrier PropertiesJournal of Polymers and the Environment, 2025
- Process steps in recycled fiber processing2024
- Cellulose Nanocrystals from Office Paper Waste for Green Mortar: Process Optimization Modeling, Characterization, and Mechanical PropertiesArabian Journal for Science and Engineering, 2022
- Nanocellulose in food packaging: A reviewCarbohydrate Polymers, 2021
- A pollution reducing enzymatic deinking approach for recycling of mixed office waste paperEnvironmental Science and Pollution Research, 2020
- Nanocellulose-based multilayer barrier coatings for gas, oil, and grease resistanceCarbohydrate Polymers, 2019
- The reuse of wastepaper for the extraction of cellulose nanocrystalsCarbohydrate Polymers, 2015
- Utilization of various lignocellulosic biomass for the production of nanocellulose: a comparative studyCellulose, 2015
- New ways to enhance the functionality of paperboard by surface treatment – a reviewPackaging Technology and Science, 2008
- Bioconversion of waste office paper to gluconic acid in a turbine blade reactor by the filamentous fungus Aspergillus nigerBioresource Technology, 2006