Erosion Characteristics and Flashing Flow of High-differential-pressure Control Valves: A Numerical Study using an Erosion-Coupled Dynamic Mesh
Authors:
Open Access
- 1 January 2024
- journal article
- research article
- Published by Academic World Research in Journal of Applied Fluid Mechanics
- Vol. 17 (3) , 559-570
Abstract
To address the issue of erosion in the control valves of blackwater flash systems in the coal chemical industry, this study investigates the dynamic erosion characteristics of one such control valve. Computational fluid dynamics is employed to compare the results obtained with a static mesh and an erosion-coupled dynamic mesh, and the valve erosion is investigated by analyzing the erosion rate, the particle impact velocity, trajectories and angle. Moreover, the relationship between the deformation caused by erosion and the dispersion of the flash vapor phase in the valve is studied, focusing on the flow resistance coefficient. The results indicate that over a period of 9 × 106 s, the impact velocity and subsequent collisions of particles reduce, and the impact angle decreases with the accumulated deformation of the valve core. Notably, the valve core is influenced primarily by the cutting that results from low impact angles, leading to a substantial decrease in the overall erosion rate of the valve, amounting to a reduction of 56.4%. The region facing the flow is at significant risk of erosion, and as the opening decreases, the erosion zone extends gradually to the annular region of the valve core and valve head, leading to increased erosion deformation. Furthermore, as the flow resistance coefficient decreases, so does the vapor volume fraction inside the valve. This study provides a theoretical basis for predicting faults and developing online monitoring solutions for high-differential-pressure control valves in blackwater flashing systems.Keywords
This publication has 23 references indexed in Scilit:
- Research on the Erosion Performance of a New Normally Open Arrow-Type Check Valve SpoolJournal of Failure Analysis and Prevention, 2022
- Erosion simulation and improvement scheme of separator blowdown system ——A case study of Changning national shale gas demonstration areaJournal of Natural Gas Science and Engineering, 2021
- Prediction of thickness loss in a standard 90° elbow using erosion-coupled dynamic meshWear, 2020
- Case study: Erosion of an axial flow regulating valve in a solid-gas pipe flowWear, 2019
- Investigation on failure process and structural improvement of a high-pressure coal water slurry valveEngineering Failure Analysis, 2019
- Slurry erosion of steel – Review of tests, mechanisms and materialsWear, 2018
- Numerical study on heat transfer effects of cavitating and flashing flows based on homogeneous mixture modelInternational Journal of Heat and Mass Transfer, 2017
- 3D CFD simulation of flashing flows in a converging-diverging nozzleNuclear Engineering and Design, 2015
- A combined numerical–experimental study on the effect of surface evolution on the water–sand multiphase flow characteristics and the material erosion behaviorWear, 2014
- Practical estimation of erosion damage caused by solid particle impactWear, 2005