Ductility Improvement Mechanism of Ti–6Al–4V+O Sintered Material
Authors:
- 1 March 2020
- journal article
- research article
- Published by Japan Institute of Metals in MATERIALS TRANSACTIONS
- Vol. 61 (3) , 430-437
Abstract
The previous study indicated powder metallurgy (PM) Ti-64 alloys with oxygen showed the increment of not only their tensile strength but elongation. This study investigated the elongation improvement mechanism of Ti-64 alloys with oxygen atoms. The mix of Ti-64 alloy powder and TiO2 particles (0∼0.4 mass%) was used as starting materials and consolidated by spark plasma sintering (SPS). The following heat treatment in vacuum was applied to sintered materials. β transus temperature increased by oxygen addition because it was one of α-phase stabilizer elements. Prior-β grains size and aspect ratio of α-Ti grains were changed by heat treatment conditions. For example, Ti-64+O alloys after heat-treated at β-phase temperature range showed acicular α-Ti grains with a large aspect ratio (6.1∼7.0) although those with heat treatment at α+β-phase temperature had α-grains with a small aspect ratio of 3.3∼4.0. These grain morphology changes strongly depended on the temperature of heat treatment, not oxygen contents. In addition, the latter materials indicated high elongation (16∼17%) compared to the former with 9∼10%. When Ti-64+O alloy specimens after tensile test were analyzed by SEM-EBSD, Kernel average misorientation (KAM) maps showed many plastic strains induced in small aspect ratio α-Ti grains. This Paper was Originally Published in Japanese in J. Jpn. Soc. Powder Powder Metallurgy 65 (2018) 699–706.Keywords
This publication has 9 references indexed in Scilit:
- Effect of Morphology of Dual-phase Structure on Inhomogeneous Plastic Deformation and Ductile Fracture in Ti-4%Cr AlloyTetsu-to-Hagane, 2017
- Three-dimensional α colony characterization and prior-β grain reconstruction of a lamellar Ti–6Al–4V specimen using near-field high-energy X-ray diffraction microscopyJournal of Applied Crystallography, 2015
- The Development of a Ti-6Al-4V Alloy via Oxygen Solid Solution Strengthening for Aerospace & Defense ApplicationsKey Engineering Materials, 2013
- Fabrication of High-strength Ti Powder Materials by Oxygen Solid Solution StrengtheningJournal of Smart Processing, 2012
- Lattice expansion of Ti–6Al–4V by nitrogen and oxygen absorptionMaterials Characterization, 2008
- Titanium2000
- Phase transformations during cooling in α+β titanium alloysMaterials Science and Engineering: A, 1998
- Influence of processing on microstructure and mechanical properties of (α+β) titanium alloysMaterials Science and Engineering: A, 1998
- Thermodynamic Properties of Dilute Titanium-Oxygen Solid Solution in Beta PhaseMaterials Transactions, JIM, 1991