Three‐dimensional nonwoven flax fiber reinforced polylactic acid biocomposites
Authors:
- 13 November 2013
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 35 (7) , 1244-1252
Abstract
Three‐dimensional (3D) shell‐structured PLA/Flax biocomposites were fabricated using a novel method incorporating the 3D nonwoven web‐forming process. PLA and flax fibers were blended in the fiber opening stage and converted to webs on the 3D mold using the air‐laying principle. The 3D webs were then consolidated by through‐air thermal bonding. The compression molding technique was used finally to convert the 3D webs to the biocomposites. The relationship between the main process parameters and the properties of the biocomposites was investigated. The results show that with increasing flax fiber content, the crush failure load, total energy absorption, specific energy absorption, and crush efficiency increased. The crushing properties decreased with increased molding temperature, but the crushing properties are not significantly affected by the molding time. The physical properties of 3D biocomposites were also evaluated and the appropriate processing parameters for 3D biocomposites were established. POLYM. COMPOS., 35:1244–1252, 2014. © 2013 Society of Plastics EngineersKeywords
This publication has 19 references indexed in Scilit:
- Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocompositesComposites Part A: Applied Science and Manufacturing, 2011
- Analysis of the Film-stacking Processing Parameters for PLLA/Flax Fiber BiocompositesJournal of Composite Materials, 2009
- Impact and tensile properties of PLA/Cordenka and PLA/flax compositesComposites Science and Technology, 2008
- Characteristics of Hermès flax fibres as a function of their location in the stem and properties of the derived unidirectional compositesComposites Part A: Applied Science and Manufacturing, 2007
- Cars from Bio‐FibresMacromolecular Materials and Engineering, 2006
- Tensile Fracture and Failure Behavior of Thermoplastic Starch with Unidirectional and Cross‐Ply Flax Fiber ReinforcementsMacromolecular Materials and Engineering, 2003
- Biodegradable composites based on l-polylactide and jute fibresComposites Science and Technology, 2003
- Natural fibres as reinforcement in polylactic acid (PLA) compositesComposites Science and Technology, 2003
- Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increaseComposites Part A: Applied Science and Manufacturing, 2002
- Nonwovens as Three-Dimensional Textiles for CompositesMaterials and Manufacturing Processes, 1995