Toward improved trade-off between thermoelectric and mechanical performances in polycarbonate/single-walled carbon nanotube composite films
Open Access
- 2 October 2020
- journal article
- research article
- Published by Springer Nature in npj Flexible Electronics
- Vol. 4 (1) , 1-7
Abstract
Polymer thermoelectric (TE) composites have witnessed explosive developments in recent years, arising from their promising prospect for lightweight flexible electronics and capability of harvesting waste-heat. In sharp contrast with intrinsically conducting polymers (CPs), the insulating thermoplastics have seldom been employed as the matrices for flexible TE composites despite their advantages of low costs, controllable melt-flowing behaviors and excellent mechanical properties. Here, we report flexible films of polycarbonate/single-walled carbon nanotube (PC/SWCNT) composites with improved trade-off between TE and mechanical performances. The SWCNTs with 1D nanostructure were dramatically aligned by PC melt-flowing under hot-pressing in the radial direction. The composite maximum power factor reaches 4.8 ± 0.8 μW m−1 K−2 at 10 wt% SWCNTs in the aligned direction, which is higher than most previously reported thermoplastics-based TE composites at the same SWCNT loading and even comparable to some intrinsically CPs and their composites. In addition, these composites display significantly higher tensile modulus and strength than CPs and their composites. This study paves an effective way to fabricate flexible films of polymer composites with simultaneously high TE and mechanical performances via judicious alignment of SWCNTs in thermoplastic polymers.Keywords
Funding Information
- National Natural Science Foundation of China (51973122)
- Guangdong Basic and Applied Basic Research Foundation
This publication has 58 references indexed in Scilit:
- Thermoelectric behaviour of segregated conductive polymer composites with hybrid fillers of carbon nanotube and bismuth tellurideMaterials Letters, 2013
- Increasing the thermoelectric power factor of polymer composites using a semiconducting stabilizer for carbon nanotubesCarbon, 2012
- Flexible carbon nanotube papers with improved thermoelectric propertiesEnergy & Environmental Science, 2011
- Mechanical and electrical property improvement in CNT/Nylon composites through drawing and stretchingComposites Science and Technology, 2011
- Preparation of high performance conductive polymer fibres from double percolated structureJournal of Materials Chemistry, 2011
- Influence of Stabilizer Concentration on Transport Behavior and Thermopower of CNT‐Filled Latex‐Based CompositesMacromolecular Materials and Engineering, 2010
- Improved Thermoelectric Behavior of Nanotube-Filled Polymer Composites with Poly(3,4-ethylenedioxythiophene) Poly(styrenesulfonate)ACS Nano, 2009
- Selective Localization and Migration of Multiwalled Carbon Nanotubes in Blends of Polycarbonate and Poly(styrene‐acrylonitrile)Macromolecular Rapid Communications, 2009
- Thermoelectric Behavior of Segregated-Network Polymer NanocompositesNano Letters, 2008
- Compression molding of glass reinforced thermoplastics: Modeling and experimentsPolymer Composites, 2000