Hydrogen inhibition in a wet aluminum dust collection system using dichromate solution
Authors:
Open Access
- 11 October 2017
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (76) , 47867-47876
Abstract
Wet dust collection systems are used worldwide for aluminum dust treatment. However, these systems pose a risk of hydrogen fire and explosion because of the reaction between aluminum dust and water produce hydrogen. This study undertakes a field survey of the wet dust collection system in an atomized aluminum powder production enterprise in China. A hydrogen inhibition method (HIM) was proposed to inhibit hydrogen production. Hydrogen production inhibition tests were conducted using specialized equipment developed by the authors. The experimental data showed that the HIM effectively inhibited the reaction between aluminum and water. To study the changes in the aluminum particles before and after application of the HIM, scanning electron microscopy (SEM) was used to characterize the morphological changes in the aluminum powder. Energy-dispersive X-ray spectroscopy (EDS) revealed that Cr was evenly distributed around the aluminum particles, indicating that the inhibition film evenly covered these particles. X-ray photoelectron spectroscopy (XPS) was used to test the valence of Cr in the inhibition film, and X-ray diffraction (XRD) was used to analyze the chemical composition of the film after the HIM treatment. The results showed that Cr(OH)3 and Al(OH)3 were widely distributed in the inhibition film, confirming the effectiveness of the HIM. The reaction mechanism between the aluminum dust and dichromate solutions was discussed, and a chemical reaction kinetics model of the hydrogen production inhibition was established. The environmental issues regarding the use of dichromate solutions were discussed. Using HIM achieved the maximum reduction in the cost of the wet dust collection-system-and-in-the-hydrogen-fire-or-explosion-risk.Keywords
This publication has 50 references indexed in Scilit:
- Hexavalent chromium reduction with scrap iron in continuous-flow system. Part 2: Effect of scrap iron shape and sizeJournal of Hazardous Materials, 2010
- Biosorption of chromium from aqueous solution and electroplating wastewater using mixture of Candida lipolytica and dewatered sewage sludgeBioresource Technology, 2010
- Enhancement of hydrogen generation rate in reaction of aluminum with waterInternational Journal of Hydrogen Energy, 2010
- Potential—pH diagrams of Cr-H2O system at elevated temperaturesTransactions of Nonferrous Metals Society of China, 2010
- Cr(VI) reduction in wastewater using a bimetallic galvanic reactorJournal of Hazardous Materials, 2010
- Hydrogen generation through massive corrosion of deformed aluminum in waterInternational Journal of Hydrogen Energy, 2010
- Hydrogen generation from water and aluminum promoted by sodium stannateInternational Journal of Hydrogen Energy, 2010
- Physicochemical Mechanism for the Continuous Reaction of γ‐Al 2 O 3 ‐Modified Aluminum Powder with WaterJournal of the American Ceramic Society, 2007
- Removal and recovery of Cr(VI) from wastewater by maghemite nanoparticlesWater Research, 2005
- Characterization of chromatized hot‐dip‐galvanized steel and 55% AlZn‐coated steel using ESCA and AESSurface and Interface Analysis, 1992