Study of Spatial Filter for Magnetocardiography Measurements without a Magnetically Shielded Room
Authors:
Open Access
- 1 January 2019
- journal article
- research article
- Published by Japanese Society for Medical and Biological Engineering in Advanced Biomedical Engineering
- Vol. 8, 170-176
Abstract
Magnetocardiography (MCG) is an effective modality for clinical application and health monitoring due to non-contact measurement and mapping of heart activity at high spatial resolution. A superconducting quantum interference device (SQUID) magnetometer is usually used for measuring MCG signals. However, a SQUID magnetometer has high running cost due to the liquid helium. Moreover, measuring MCG signals inside a magnetically shielded room (MSR) can be costly. Therefore, we developed a 64-channel magneto-impedance (MI) sensor system that does not require an MSR. However, the MCG measurement has very high noise level without an MSR. In this paper, we discuss the signal processing techniques of various noise reduction methods to decrease very loud noises. In particular, we investigated three spatial filter conditions that decrease correlated noises among the 64-channel signals to achieve a high peak value of MCG signals. By using a spatial filter that uses the average of the circumference channels and gradient, the distortion of MCG signals can be reduced. The average reduction in amplitude of the R wave as a result of using a spatial filter was 4.5 pT. Furthermore, the signal to noise ratio (SNR) of the P wave was 29.1 dB, while that of the R wave was 42.3 dB, and clear MCG signals were obtained when using the spatial filter that uses the average of the circumference channels and the gradient. Finally, we successfully measured the MCG signals without an MSR.Keywords
This publication has 9 references indexed in Scilit:
- Development of Peak-to-Peak Voltage Detector-Type MI Gradiometer for MagnetocardiographyIEEE Transactions on Magnetics, 2018
- Magnetocardiography and magnetoencephalography measurements at room temperature using tunnel magneto-resistance sensorsApplied Physics Express, 2018
- Estimation of Magnetocardiography Current Sources Using Reconstructed Magnetic Field DataIEEE Transactions on Magnetics, 2017
- The First 36 Channel Fluxgate-Sensor-Array for the MCG MeasurementIEEJ Transactions on Sensors and Micromachines, 2016
- Magnetocardiogram measured by fundamental mode orthogonal fluxgate arrayJournal of Applied Physics, 2015
- Optimization of the magnetic noise and sensitivity of giant magnetoimpedance sensorsJournal of Applied Physics, 2008
- Denoising based on time-shift PCAJournal of Neuroscience Methods, 2007
- Recent advances in magnetocardiographyJournal of Electrocardiology, 2004
- Magneto-impedance effect in amorphous wiresApplied Physics Letters, 1994