CMUT fabrication based on a thick buried oxide layer
Authors:
- 1 October 2010
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2010 (10510117) , 547-550
Abstract
We introduce a versatile fabrication process for direct wafer-bonded CMUTs. The objective is a flexible fabrication platform for single element transducers, 1D and 2D arrays, and reconfigurable arrays. The main process features are: A low number of litho masks (five for a fully populated 2D array); a simple fabrication sequence on standard MEMS tools without complicated wafer handling (carrier wafers); an improved device reliability; a wide design space in terms of operation frequency and geometric parameters (cell diameter, gap height, effective insulation layer thickness); and a continuous front face of the transducer (CMUT plate) that is connected to ground (shielding for good SNR and human safety in medical applications). All of this is achieved by connecting the hot electrodes individually through a thick buried oxide layer, i.e. from the handle layer of an SOI substrate to silicon electrodes located in each CMUT cell built in the device layer. Vertical insulation trenches are used to isolate these silicon electrodes from the rest of the substrate. Thus, the high electric field is only present where required - in the evacuated gap region of the device and not in the insulation layer of the post region. Array elements (1D and 2D) are simply defined be etching insulation trenches into the handle wafer of the SOI substrate.Keywords
This publication has 10 references indexed in Scilit:
- Wafer Bonding2011
- CMUT with substrate-embedded springs for non-flexural plate movement2010
- FEA of CMUTs suitable for wide gas pressure range applications2010
- Wafer-bonded 2-D CMUT arrays incorporating through-wafer trench-isolated interconnects with a supporting frameIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2009
- 6F-2 Extended Insulation Layer Structure for CMUTs2007
- Capacitive micromachined ultrasonic transducers: fabrication technologyIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2005
- Nonlinear Limits for Single-Crystal Silicon MicroresonatorsJournal of Microelectromechanical Systems, 2004
- Developments in Si and SiO 2 etching for MEMS-based optical applications2004
- Fabricating capacitive micromachined ultrasonic transducers with wafer-bonding technologyJournal of Microelectromechanical Systems, 2003
- Silicon fusion bond interfaces resilient to wet anisotropic etchantsJournal of Micromechanics and Microengineering, 2001