Molecular dynamics simulation of incipient plasticity of nickel substrates of different surface orientations during nanoindentation
Authors:
- 1 February 2015
- journal article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 31 (3) , 325-331
Abstract
The present study aims to elucidate the anisotropic characteristics in material responses for crystallographic nickel substrates with (001), (011) and (111) surface orientations during nanoindentation. Molecular dynamic simulation is applied to compensate for the experimental limitation of nanoindentation, particularly for pure nickel substrates. Defect nucleation and evolution in Ni single crystal of these three crystal orientations was examined. Hardness and Young's modulus are also extracted in different orientations. The Young's modulus of (111) crystallographic orientation is the largest, while that of (001) surface is the smallest. The sensitivity of the yield point for face centred cubic crystals depends on the crystallographic orientation. The (001) crystallographic orientation reaches the yield point first, while the (111) crystallographic orientation is the most difficult in which to achieve yield. Using a visualisation method of centrosymmetry parameter, the homogeneous nucleation and early evolution of dislocations were investigated, deepening understanding of incipient plasticity at the atomic scale. The present results suggest that defect nucleation and evolution are the root of curve jitter. The indentation depth of the elastic–plastic transition point varies in the different crystallographic orientation models, and appears latest in the (111) model. The strain energy of the substrate exerted by the tip is stored by the formation of homogeneous nucleation and is dissipated by the dislocation slide in the {111} glide plane. The three nickel substrates with different crystallographic orientations exhibit different forms of dislocation propagation.Keywords
This publication has 25 references indexed in Scilit:
- Molecular dynamics study of the mechanical characteristics of Ni/Cu bilayer using nanoindentationChinese Physics B, 2012
- The nanoindentation responses of nickel surfaces with different crystal orientationsMolecular Simulation, 2007
- Interaction of lattice dislocations with a grain boundary during nanoindentation simulationMaterials Letters, 2007
- Atomic-scale simulations of nanoindentation-induced plasticity in copper crystals with nanometer-sized nickel coatingsActa Materialia, 2006
- Corrosive effect of acrylic acid on magnetic head and media of an operating hard disk driveTribology International, 2005
- The effects of hydrogenated carbon films with different film thickness and nitrogen content on specimen mechanical properties, scratch critical load, adhesion work and tribological behaviorDiamond and Related Materials, 2004
- Characterization of nickel phosphorus surface by ToF-SIMSApplied Surface Science, 2004
- The effect of coating thickness, mechanical strength and hardness properties on the milling performance of PVD coated cemented carbides insertsSurface and Coatings Technology, 2004
- Discrete and continuous deformation during nanoindentation of thin filmsActa Materialia, 2000
- Design of a Ti/TiC/DLC functionally gradient coating based on studies of structural transitions in Ti–C thin filmsThin Solid Films, 1997