Scaling of Average Power in All-Fiber Side-Pumped Sub-MW Peak Power ps-Pulses Yb-Doped Tapered Amplifier
Authors:
- Egor K. MikhailovEMEgor K. Mikhailov
- Andrey E. LevchenkoALAndrey E. Levchenko
- Vladimir V. VelmiskinVVVladimir V. Velmiskin
- Tatiana S. ZaushitsynaTZTatiana S. Zaushitsyna
- Mikhail M. BubnovMBMikhail M. Bubnov
- Denis S. LipatovDLDenis S. Lipatov
- Andrey V. ShirmankinASAndrey V. Shirmankin
- Vladimir A. KamyninVKVladimir A. Kamynin
- Mikhail E. LikhachevMLMikhail E. Likhachev
Open Access
- 27 September 2024
- Vol. 11 (10) , 915
Abstract
In this study, we explored the potential for average power scaling in a monolithic side-counter-pumped combiner based on Yb-doped tapered fibers. The optimal configuration of the pump-feeding fibers was determined through experiments with passive signal fibers. It is shown that pump coupling efficiencies higher than 83% can be achieved for fibers coated with low-index polymer with a numerical aperture (NA) around 0.45 and more than 74% for fibers with second cladding made of F-doped silica (NA ~ 0.26) for pump power up to 100 W. It was shown that the main factor significantly reducing the pump-to-signal conversion efficiency in the developed monolithic Yb-doped tapered fiber amplifiers is the pump leakage due to the decrease of the first cladding diameter along the tapered fiber and the corresponding increase of the pump NA (which becomes higher than the NA of the first cladding). A solution to this problem based on a narrowing diameter at the output end of the tapered fiber was proposed and realized. The record-high average power of 41 W, with a coupling efficiency of 77.7%, was demonstrated in a monolithic amplifier with a threshold of nonlinear effects of more than 600 kW (for ps pulses). Prospects for further power scaling in all-fiber sub-MW peak power amplifiers are discussed.Keywords
Funding Information
- Center of Excellence “Center of Photonics” (075-15-2022-315)
This publication has 30 references indexed in Scilit:
- Recent advances and future outlook in mode-locked lasers with multimode fibersApplied Physics Reviews, 2023
- All-Fiber Chirped-Pulse Amplifier Emitting 670 fs Pulses With 92 MW Peak PowerIEEE Photonics Technology Letters, 2022
- Tapered active fiber simultaneously enabled 141 W high average and 1.3 MW high peak power via all-fiber and polarization-maintained picosecond amplifierOptics & Laser Technology, 2022
- Picosecond Yb-doped tapered fiber laser system with 1.26 MW peak power and 200 W average output powerScientific Reports, 2020
- Taper-fused side pump combiner for all-fiber lasers and amplifiers: A reviewOptics & Laser Technology, 2020
- Effect of the surrounding refractive index and fusion-depth on side-pump combinersOptics & Laser Technology, 2018
- Generation of 46 W green-light by frequency doubling of 96 W picosecond unpolarized Yb-doped fiber amplifierOptics & Laser Technology, 2018
- Megawatt-peak-power picosecond all-fiber-based laser in MOPA using highly Yb 3+ -doped LMA phosphate fiberOptics Communications, 2018
- Multimegawatt peak-power, single-transverse-mode operation of a 100μm core diameter, Yb-doped rodlike photonic crystal fiber amplifierApplied Physics Letters, 2006
- Pump radiation distribution in multi-element first cladding laser fibresQuantum Electronics, 2005