Electrochemical Performance of Ti-Based Commercial Biomaterials
Open Access
- 17 January 2019
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2019, 1-15
Abstract
In order to determine the electrochemical behavior against the corrosion of different commercial biomaterials, in this study the results of the evaluation of different titanium implants are reported. The commercial implants evaluated were purchased randomly with different suppliers. The different biomaterials were subjected to studies of potentiodynamic polarization curves, open circuit potential measurements, linear polarization resistance measurements, and electrochemical impedance spectroscopy measurements in a 0.9% NaCl solution. The results showed that the chemical composition of the biomaterials corresponds to commercially pure Ti or to the alloy Ti6Al4V. In addition, although all the biomaterials showed a high resistance to corrosion, notable differences were observed in their performance. These differences were associated with the thermomechanical processes during the manufacture of the biomaterial, which affected its microstructure.Keywords
Funding Information
- Secretaría de Ciencia, Humanidades, Tecnología e Innovación
This publication has 33 references indexed in Scilit:
- An FIB-SEM slice-and-view study of three-dimensional beta phase distribution in Ti-6Al-4VJournal of Electron Microscopy, 2011
- Modular titanium alloy neck adapter failures in hip replacement - failure mode analysis and influence of implant materialBMC Musculoskeletal Disorders, 2010
- Ti based biomaterials, the ultimate choice for orthopaedic implants – A reviewProgress in Materials Science, 2009
- Corrosion behaviour of NiTi alloyElectrochimica Acta, 2009
- 3D, chemical and electrochemical characterization of blasted TI6Al4V surfaces: Its influence on the corrosion behaviourElectrochimica Acta, 2007
- Corrosion characterization of titanium alloys by electrochemical techniquesElectrochimica Acta, 2006
- Corrosion behavior of titanium in the presence of calcium phosphate and serum proteinsBiomaterials, 2005
- Effect of phase transformations on laser forming of Ti–6Al–4V alloyJournal of Applied Physics, 2005
- Characterization of different materials for corrosion resistance under simulated body fluid conditionsMaterials Characterization, 2002
- Corrosion and Passivity of Ti-13% Nb-13% Zr in Comparison to Other Biomedical Implant AlloysCorrosion, 1997