Cryogenic etching of deep narrow trenches in silicon
Authors:
- 1 July 2000
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 18 (4) , 1848-1852
Abstract
Deep and narrow anisotropic etching of silicon structures has been investigated in a low-pressure high density plasma reactor working with a cryogenic chuck. We have previously demonstrated the feasibility of this technique on such structures. Improvement of etch rate and profiles has been studied and new results show 2 μm wide trenches etched to a depth of 50 μm at an average etch rate of 5 μm/min with highly anisotropic profiles and very high selectivity (>500:1) toward the SiO2 mask. An evaluation of a commercially available reactor from Alcatel has been carried out and similar results are obtained. A phosphosilicate glass mask has been used to study the effect on profiles. It is shown that undercut is reduced while bowing is independent of the mask material. Since surface temperature strongly affects the profiles, wafer deformations in our cryogenic chuck have been measured and temperature evolution across the wafer has been estimated. A significant temperature difference of 10 °C between the chuck and the wafer is expected for thin wafers (210 μm).Keywords
This publication has 7 references indexed in Scilit:
- Deep anisotropic etching of siliconJournal of Vacuum Science & Technology A, 1999
- Characterization of a Time Multiplexed Inductively Coupled Plasma EtcherJournal of the Electrochemical Society, 1999
- Advanced silicon etching using high-density plasmas1995
- Quantitative x-ray photoelectron spectroscopy of CuAu, CoNi, and CuNi alloys using theoretical photoionization cross sections or reference spectraJournal of Vacuum Science & Technology A, 1994
- Low temperature etch chuck: Modeling and experimental results of heat transfer and wafer temperatureJournal of Vacuum Science & Technology A, 1992
- Low-Temperature Microwave Plasma Etching of Crystalline SiliconJapanese Journal of Applied Physics, 1991
- Low-temperature dry etchingJournal of Vacuum Science & Technology A, 1991