Investigations of the Rear-End Flow Structures on a Sedan Car
Open Access
- 5 April 2016
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
The aerodynamic drag, fuel consumption and hence CO2 emissions, of a road vehicle depend strongly on its flow structures and the pressure drag generated. The rear end flow which is an area of complex three-dimensional flow structures, contributes to the wake development and the overall aerodynamic performance of the vehicle.This paper seeks to provide improved insight into this flow region to better inform future drag reduction strategies. Using experimental and numerical techniques, two vehicle shapes have been studied; a 30% scale model of a Volvo S60 representing a 2003MY vehicle and a full scale 2010MY S60.First the surface topology of the rear end (rear window and trunk deck) of both configurations is analysed, using paint to visualise the skin friction pattern. By means of critical points, the pattern is characterized and changes are identified studying the location and type of the occurring singularities. The flow field away from the surface is then analysed using PIV measurements and CFD for the scale model and CFD simulations for the full scale vehicle. The flow field is investigated regarding its singular points in cross-planes and the correlation between the patterns for the two geometries is analysed.Furthermore, it is discussed how the occurring structures can be described in more generalized terms to be able to compare different vehicle geometries regarding their flow field properties.The results show the extent to which detailed flow structures on similar but distinct vehicles are comparable; as well as providing insight into the complex 3D wake flow.Keywords
This publication has 20 references indexed in Scilit:
- Links between Notchback Geometry, Aerodynamic Drag, Flow Asymmetry and Unsteady Wake StructureSAE International Journal of Passenger Cars - Mechanical Systems, 2011
- Observation of Flow Asymmetry Over the Rear of Notchback VehiclesSAE International Journal of Advances and Current Practices in Mobility, 2007
- ¼ Scale VehicleWake Pattern Analysis using Near-Wall PIVSAE International Journal of Advances and Current Practices in Mobility, 2006
- Time Averaged and Unsteady Near-Wake Analysis of CarsSAE International Journal of Advances and Current Practices in Mobility, 2001
- An Experimental Investigation of the Flow Over the Rear End of a Notchback Automobile ConfigurationSAE International Journal of Advances and Current Practices in Mobility, 2000
- Unsteady-Wake Analysis of the Aerodynamic Drag of a Notchback Model with Critical Afterbody GeometrySAE International Journal of Advances and Current Practices in Mobility, 1992
- Analysis of Wake Pattern for Reducing Aerodynamic Drag of Notchback ModelSAE International Journal of Advances and Current Practices in Mobility, 1990
- Simultaneous Use Of Oil-Flow Patterns And Total Pressure Tomographies For A More Complete Understanding Of Flow Structures Around A CarSAE International Journal of Advances and Current Practices in Mobility, 1988
- Influence of Base Slant on the Wake Structure and Drag of Road VehiclesJournal of Fluids Engineering, 1983
- Wake Structure of Typical Automobile ShapesJournal of Fluids Engineering, 1981