Plate-Shaped Graphite for Improved Performance of Flow-Electrode Capacitive Deionization
- 7 October 2017
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 164 (13) , E480-E488
Abstract
Capacitive deionization (CDI) using a flow-electrode primarily composed of porous materials and an aqueous electrolyte, exhibits continuous deionization and a high desalting efficiency. The development of flow-electrodes with high capacitance and low resistance is essential for achieving an efficient flow-electrode capacitive deionization (FCDI) system with low energy consumption. For this purpose, studies on conductive additives (CAs) that do not clog the flow-channel must be conducted. Here, we evaluated the desalting performance of flow-electrodes with spherical and plate-type conductive additives having sizes between 1 and 10 μm and possessing powder conductivities similar to or higher than nano-sized carbon black, which is often used as the CA in solid fixed electrodes in conventional CDI systems. We confirmed that plate-shaped CAs reduced resistance near the pores and enhanced the desalting performance of the flow-electrodes in FCDI systems. The positive effect of such plate-shaped CAs appears to originate from efficient charge percolation between the ACs via the electrical conductive direction of the graphite and the alignment of the exposed graphite edges to the pumping direction of the flow-electrode. Finally, we verified that the flow-electrode with the newly discovered micro-sized CA could be operated without clogging the flow-channel in FCDI and showed an improved desalting performance of around 1.5 times compared the flow-electrode without the micro-sized CA for extended periods of time.Keywords
Funding Information
- Korea Institute of Energy Research (KIER) (B4-2452-02, B7-2461-01)
This publication has 45 references indexed in Scilit:
- Graphene-based materials for capacitive deionizationJournal of Materials Chemistry A, 2017
- Water desalination via capacitive deionization: what is it and what can we expect from it?Energy & Environmental Science, 2015
- Review on the science and technology of water desalination by capacitive deionizationProgress in Materials Science, 2013
- Graphene prepared via a novel pyridine–thermal strategy for capacitive deionizationJournal of Materials Chemistry, 2012
- Water Desalination Using Capacitive Deionization with Microporous Carbon ElectrodesACS Applied Materials & Interfaces, 2012
- Mesoporous Carbon for Capacitive Deionization of Saline WaterEnvironmental Science & Technology, 2011
- Capacitive deionization of NaCl solutions using carbon nanotube sponge electrodesJournal of Materials Chemistry, 2011
- Using activated carbon electrode in electrosorptive deionisation of brackish waterDesalination, 2008
- Treatment of brackish produced water using carbon aerogel-based capacitive deionization technologyWater Research, 2008
- Development of a carbon sheet electrode for electrosorption desalinationDesalination, 2007