Investigation on Dielectric Window Treelike Breakdown and Suppression Under HPM in Vacuum
Authors:
- 8 April 2010
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 38 (6) , 1403-1410
Abstract
Surface discharges of dielectric window seriously limit the generation and transmission of high-power microwaves (HPMs), which block the development of microwave technology. An S-band (2.856-GHz) HPM experimental system is established. Several kinds of dielectric window materials, i.e., polyethylene, polytetrafluoroethylene, and polymethyl methacrylate, are investigated under S-band HPMs in vacuum, and the characteristics of destroyed dielectric samples are analyzed with macroscopic and microcosmic observation. Treelike breakdown channels are found on the upstream face of dielectric window along the direction of microwave electric field, and a breakdown development model with an increase of cumulative breakdown times is proposed. Dielectric surface breakdown suppression technologies are also studied, i.e., surface-polishing and surface-notching treatments. The experimental results show that the polishing treatment on the dielectric surface can decrease breakdown degree and increase surface breakdown threshold. The surface grooves that are parallel to the direction of electric field will reduce the surface breakdown threshold, while the grooves that are perpendicular to the direction of electric field can suppress the surface breakdown obviously. The effect is influenced by the depth and width of grooves on the dielectric surface, and correlative theoretical analysis is discussed.Keywords
This publication has 16 references indexed in Scilit:
- The effect of grooved surface on dielectric multipactorJournal of Applied Physics, 2009
- Invited Paper - Modeling RF Window Breakdown: from Vacuum Multipactor to RF PlasmaIEEE Transactions on Dielectrics and Electrical Insulation, 2007
- Interface Breakdown During High-Power Microwave TransmissionIEEE Transactions on Magnetics, 2006
- Modeling RF Window Breakdown: From Vacuum Multipactor to Volumetric Ionization Discharge2008 International Symposium on Vlsi Technology, Systems and Applications (VLSI-TSA), 2006
- Surface charging by UV irradiation at the alumina RF window2003
- Microwave magnetic field effects on high-power microwave window breakdownIEEE Transactions on Plasma Science, 2000
- Initiation of high power microwave dielectric interface breakdownJournal of Applied Physics, 1999
- Window breakdown caused by high-power microwavesIEEE Transactions on Plasma Science, 1998
- On the heating of output windows of microwave tubes by electron bombardmentIRE Transactions on Electron Devices, 1961
- Some high-power window failuresIRE Transactions on Electron Devices, 1961