Laser-ultrasonic Monitoring of Austenite Recrystallization in C–Mn Steel
Authors:
- Ali SmithASAli Smith
- Silvio E. KrugerSKSilvio E. Kruger
- Jilt SietsmaJSJilt Sietsma
- Sybrand van der ZwaagSZSybrand van der Zwaag
- 1 January 2006
- journal article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 46 (8) , 1223-1232
Abstract
The static recrystallization kinetics of hot deformed austenite were characterised by a combination of insitu laser-ultrasonics and stress relaxation measurements. Samples were deformed in compression at temperatures of 850\uc2\ub0C and 900\uc2\ub0C. The applied strain was varied between 0.2 and 0.5, whilst the strain rates used were 0.1 s-1 and 0.5 s-1. At various points during annealing samples were quenched and analysed by optical microscopy. During recovery prior to recrystallization the ultrasonic velocity change and attenuation were almost constant. During recrystallization, the velocity change and attenuation decreased for the conditions imposed. The decrease in velocity change was mostly due to a change in the overall texture. The decrease in attenuation could be explained by a change in grain size. Unfortunately, the additional effect of dislocation damping on attenuation could not be quantified. Comparison of the stress relaxation kinetics with the observed decrease in ultrasonic velocity change and attenuation generally showed good agreement. From the attenuation measurements the grain sizes in the recrystallised structure for various applied strains were calculated. Comparison with grain sizes determined from optical microscopy showed reasonable agreement considering the accuracy of the attenuation measurements and the assumptions made.Peer reviewed: YesNRC publication: YeKeywords
This publication has 18 references indexed in Scilit:
- A metallurgical interpretation of the static recrystallization kinetics of an intercritically deformed C-Mn steelMetallurgical and Materials Transactions A, 2004
- Recovery Processes in the Ferrite Phase in C-Mn SteelISIJ International, 2004
- Ultrasonic monitoring of dislocations during fatigue of pearlitic rail steelMaterials Science and Engineering: A, 2003
- Micro- and nano-scale deformation processes during scratch damage in high density polyethyleneMaterials Science and Technology, 2003
- On-line measurement of texture, thickness and plastic strain ratio using laser-ultrasound resonance spectroscopyUltrasonics, 2002
- A new technique for the quantitative real-time monitoring of austenite grain growth in steelScripta Materialia, 2000
- Ultrasonic attenuation peak during fatigue of polycrystalline copperActa Materialia, 2000
- Laser-ultrasonic monitoring of phase transformations in steelsScripta Materialia, 1998
- Stress relaxation method for investigation of softening kinetics in hot deformed steelsMaterials Science and Technology, 1995
- Ultrasonic velocity measurements for estimation of grain size in austenitic stainless steelNDT & E International, 1995