Parametric analysis of thermal swing cycles for multicomponent adsorption
Authors:
- 1 October 1989
- journal article
- Published by Wiley in AIChE Journal
- Vol. 35 (10) , 1667-1677
Abstract
A study was made of the effect of design and operating parameters on the regeneration of a fixed bed of activated carbon. Two adsorbed species were removed by a hot gas purge, making the study relevant to thermal swing cycles used commercially. The analysis utilized direct experimental results as well as simulated results using a model described earlier by the authors (Huang and Fair, 1988).Regeneration parameters studied were: type of purge gas, purge gas contact time and velocity, regeneration temperature, initial bed loading, and bed pressure. These were related to certain parameters influencing the adsorption step: type of carrier gas, feed concentration, contact time and velocity, pressure, and initial bed temperature. The results are summarized in the form of guidelines for optimal regeneration cycle specification.Keywords
This publication has 9 references indexed in Scilit:
- Study of the adsorption and desorption of multiple adsorbates in a fixed bedAIChE Journal, 1988
- Parametric analysis of thermal regeneration of adsorption bedsIndustrial & Engineering Chemistry Research, 1988
- Nonequilibrium, nonisothermal desorption of single adsorbate by purgeIndustrial & Engineering Chemistry Process Design and Development, 1986
- Adsorption interference in mixtures of adsorbate gases flowing through activated carbon adsorber bedsLangmuir, 1986
- Vacancy solution theory of adsorption using Flory‐Huggins activity coefficient equationsAIChE Journal, 1985
- Breakthrough curves in the cyclic steady state for adsorption systems with concave isothermsChemical Engineering Science, 1978
- Nonisothermal Desorption by Gas Purge of Single Solutes from Fixed-Bed Adsorbers. II. Experimental Verification of Equilibrium TheoryIndustrial & Engineering Chemistry Process Design and Development, 1975
- Nonisothermal Desorption by Gas Purge of Single Solutes in Fixed-Bed Adsorbers. I. Equilibrium TheoryIndustrial & Engineering Chemistry Process Design and Development, 1975
- On the possibility of omitting the cooling step in thermal gas adsorption cyclesThe Canadian Journal of Chemical Engineering, 1975