Fabrication of A 10 Tesla Cryogen-Free Superconducting Magnet
- 6 January 2011
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 21 (3) , 1608-1611
Abstract
A superconducting magnet with the center magnetic field of 10 T and warm bore size of 100 mm was designed and fabricated. The magnet coils were fabricated with NbTi and Nb3Sn superconducting wires. The NbTi and Nb3Sn coils were manufactured with inter-winding support structure. A cryostat was designed and fabricated to accommodate the magnet with an outer diameter of 740 mm and height of 560 mm. The magnet system was cooled by a GM cryocooler with cooling capacities of 35 W at the first stage and 1.5 W at the second stage cold head. A pair of Bi2223 bulk high temperature current leads were employed to reduce heat leakage to the magnet. Total weight of the magnet system is about 230 kg. The superconducting magnet can be cooled down to 4.1 K in 90 hours with the cryocooler. The magnet was tested and reached the maximum operating current of 119.4 A, corresponding to a center magnetic field of 10.25 T in the warm bore. No quench was observed during the test process. It shows that the magnet stability is improved with the inter-winding support structure in magnet coil fabrication. The superconducting magnet system has been operating stably for several months. Extensive experiments on magnetic separation have been done on the magnet setup. In this paper, the detailed information of magnet design, fabrication and test are presented.Keywords
This publication has 7 references indexed in Scilit:
- Study on industrial wastewater treatment using superconducting magnetic separationCryogenics, 2011
- Upgrading Design to a 25 T Cryogen-Free Superconducting Magnet Based on Low Temperature and High Magnetic Field Properties of the Practical CVD Processed Coated ConductorsIEEE Transactions on Applied Superconductivity, 2010
- Development of high magnetic field superconducting magnet technology and applications in ChinaCryogenics, 2007
- Tests on a 6 T Conduction-Cooled Superconducting MagnetIEEE Transactions on Applied Superconductivity, 2006
- Characteristics of Cryogenic Temperature Sensors Under Magnetic FieldsIEEE Transactions on Applied Superconductivity, 2006
- Development of Wide-Bore Conduction-Cooled Superconducting Magnet System for Material Processing ApplicationsIEEE Transactions on Applied Superconductivity, 2004
- Design concepts for a mechanically refrigerated 13 K superconducting magnet systemIEEE Transactions on Magnetics, 1983