Development of Mathematical Models in Explicit Form for Design and Analysis of Axial Flux Permanent Magnet Synchronous Machines
Open Access
- 30 October 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (21) , 7695
Abstract
This article proposes a methodology for the design of double-sided coreless axial flux permanent magnet synchronous machines, which is based on a developed model for calculating the axial component of the magnetic flux density in the middle of the distance between opposite permanent magnets, which also represents the middle of the stator. Values for different geometric parameters represent the input data for the mathematical model in explicit form. The input data are calculated by using a simplified finite element method (FEM), which means that calculations of simplified 3D models are performed. The simplified model consists of two rotor disks with surface-mounted permanent magnets and air between them, instead of stator windings. Such a simplification is possible due to similar values of permeability of the air and copper. For each simplified model of the machine the axial component of the magnetic flux density is analyzed along a line passing through the center of opposite permanent magnets and both rotor disks. Values at the middle of the distance between the opposite permanent magnets are the lowest and are therefore selected for the input data at different stator, rotor disks and permanent magnets (PM) thicknesses. Such input data enable the model to consider the nonlinearity of materials.Keywords
This publication has 38 references indexed in Scilit:
- Design and analysis of double‐sided slotless axial‐flux permanent magnet machines with conventional and new stator coreIET Electric Power Applications, 2015
- Analysis of Overhang Effect for a Surface-Mounted Permanent Magnet Machine Using a Lumped Magnetic Circuit ModelIEEE Transactions on Magnetics, 2013
- Design and determination of stator geometry for axial flux permanent magnet free rod rotor synchronous motorMeasurement, 2011
- Structural analysis of low-speed axial-flux permanent-magnet machinesIEE Proceedings - Electric Power Applications, 2005
- Electromagnetic design of axial-flux permanent magnet machinesIEE Proceedings - Electric Power Applications, 2004
- A comparison of power density for axial flux machines based on general purpose sizing equationsIEEE Transactions on Energy Conversion, 1999
- Analysis and performance of an ironless stator axial flux PM machineIEEE Transactions on Energy Conversion, 1999
- Compact Wheel Direct Drive for EVsIEEE Industry Applications Magazine, 1996
- Multistage axial-flux PM machine for wheel direct driveIEEE Transactions on Industry Applications, 1996
- ‘TORUS’: a slotless, toroidal-stator, permanent-magnet generatorIEE Proceedings B Electric Power Applications, 1992