Parameter estimation of epoxy resin cure kinetics by dynamicsDSCdata
Authors:
Open Access
- 5 July 2024
- journal article
- research article
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 35 (7)
Abstract
This study focused on determining the curing kinetic parameters of amine‐epoxy resin by performing dynamic DSC tests. The Kissinger and Crane equations were used to determine the activation energy, the pre‐exponential factor, and the reaction order as kinetic parameters for curing. The Ozawa equation was also used to determine the activation energy that changes at different levels of cure during the reaction. The average activation energy obtained by the Ozawa method was compared with the Kissinger activation energy. In addition, the T‐β extrapolation method was used to determine the optimum curing temperature. The kinetic parameters obtained from the Kissinger and Crane equations were used in the nth‐order kinetic model to predict the degree of cure at a given time and temperature. The linear regression fitting method was used in Minitab software to determine the curing parameters. The results were evaluated based on the fitting parameters. This study provides a theoretical basis for the curing mechanisms of epoxy matrix fiber composites used in the manufacture of wind turbine blades.Keywords
This publication has 32 references indexed in Scilit:
- Simulation and optimized design of cure cycle for three‐dimensional polymer‐matrix composite componentJournal of Applied Polymer Science, 2023
- Investigation of the cure kinetics and thermal stability of an epoxy system containing cystamine as curing agentPolymers for Advanced Technologies, 2020
- Cure kinetics, morphology development, and rheology of a high-performance carbon-fiber-reinforced epoxy compositeComposites Part B: Engineering, 2019
- Mechanical property evaluation of glass–jute fiber reinforced polymer compositesPolymers for Advanced Technologies, 2016
- Modelling of curing kinetics of amine cured epoxy resins for vacuum assisted resin infusion moldingThe Canadian Journal of Chemical Engineering, 2013
- Study on phenomenological curing model of epoxy resin for prediction of degree of cureJournal of Thermal Analysis and Calorimetry, 2012
- Predicting the cure of thermosetting polymers: The isoconversion mapPolymer Composites, 2008
- Cure kinetics of epoxy resin used for advanced compositesPolymer International, 2004
- Cure kinetics of the ring‐opening metathesis polymerization of dicyclopentadieneJournal of Polymer Science Part A: Polymer Chemistry, 2002
- Kinetic studies of thermoset cure reactions: A reviewPolymer Composites, 1997