Optimising 3D Print Parameters for L-Joint Strength Using Taguchi Method
Open Access
- 15 May 2025
- journal article
- Published by Black Sea Journal of Engineering and Science in Black Sea Journal of Engineering and Science
- Vol. 8 (3) , 591-597
Abstract
Additive manufacturing offers advantages such as reduced waste and cost-effectiveness, and its use is increasing in industries such as aerospace and automotive. One of the additive manufacturing methods, fused deposition modelling (FDM), has a wide range of applications. This study investigated the effects of printing parameters on the strength of L-joints made using FDM. Polylactic acid (PLA), a biodegradable and recyclable material, was used to produce L-joints. The study analyses the effects of three printing parameters: nozzle temperature, filling ratio, and printing pattern. Taguchi method was used to optimise these parameters, and then ANOVA (analysis of variance) was performed to determine their contributions to the joint strength. Optimum values were obtained at 210°C nozzle temperature, 70% filling rate and zigzag pattern. The results show that the printing pattern and filling ratio significantly affect the strength of the joint, while nozzle temperature has less effect. The zigzag printing pattern and higher filling rate (70%) provided the strongest joints, reaching a maximum force of 358.4 N during tensile tests. The study concluded that optimising 3D printing parameters is very important to increase the strength and quality of printed joints.Keywords
Funding Information
- Ondokuz Mayıs University (BAP09-2024-5193)
This publication has 21 references indexed in Scilit:
- Effects of the printing parameters on geometric accuracy and mechanical properties of digital light processing printed polymerJournal of Materials Science, 2024
- Optimization of 3D printer settings for recycled PET filament using analysis of variance (ANOVA)Heliyon, 2024
- Influences of 3D printing parameters on the mechanical properties of wood PLA filament: an experimental analysis by Taguchi methodProgress in Additive Manufacturing, 2023
- Synthesization and Characterization of Silicon Carbide and Boron Nitride-Reinforced Al–Zn–Mg Alloy Hybrid Nanocomposites Using Squeeze Casting MethodInternational Journal of Metalcasting, 2023
- Optimization of FDM parameters for improving part quality, productivity and sustainability of the process using Taguchi methodology and desirability approachProgress in Additive Manufacturing, 2020
- Mechanical properties of L-joint with composite sandwich structureComposite Structures, 2019
- Optimization of 3D printing parameters of Screw Type Extrusion (STE) for ceramics using the Taguchi methodCeramics International, 2019
- Experimental study on the 3D‐printed plastic parts and predicting the mechanical properties using artificial neural networksPolymers for Advanced Technologies, 2016
- Modeling of the dynamic delamination of L-shaped unidirectional laminated compositesComposite Structures, 2012
- The Taguchi methodWIREs Computational Statistics, 2011