Microstructural Evolution and Tensile Performance of a Commercial Fe–Mn–Al–C High‐Manganese Steel
Authors:
- 17 March 2023
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 94 (7)
Abstract
High‐manganese austenitic steels are one kind of superior materials applied in automotive lightweight industry because of their high strength and large plasticity. Herein, transmission electron microscopy and electron channeling contrast imaging combined with electron backscatter diffraction, etc. are used to analyze the microstructural evolution and dominant deformation mechanisms of a Fe–13.6Mn–1.2Al–0.6C (wt%) steel during tensile deformation. Due to the multiple‐stage strain hardening effect, this alloy exhibits excellent combination of strength and plasticity. The yield strength, ultimate tensile strength, and elongation reach 540 (±30) MPa, 1120 (±70) MPa, and 74 (±3)%, respectively. The early hardening stage is fully determined by dislocation accumulation and planar slip. With the strain increasing, the plastic deformation of the steel is dominated by twinning and microbanding, which lead to the synergetic effect of twinning‐induced plasticity and microband‐induced plasticity.Keywords
Funding Information
- National Natural Science Foundation of China (51901248)
This publication has 38 references indexed in Scilit:
- Abnormal room temperature serrated flow and strain rate dependence of critical strain of a Fe–Mn–C twin-induced plasticity steelMaterials Science and Engineering: A, 2013
- Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe–Mn–Al–C steelActa Materialia, 2012
- Stacking fault energy and plastic deformation of fully austenitic high manganese steels: Effect of Al additionMaterials Science and Engineering: A, 2010
- Hall-Petch Relationship of a TWIP SteelKey Engineering Materials, 2009
- EBSD for analysing the twinning microstructure in fine‐grained TWIP steels and its influence on work hardeningJournal of Microscopy, 2009
- Factors influencing the tensile behavior of a Fe–28Mn–9Al–0.8C steelMaterials Science and Engineering: A, 2009
- Transformation-induced plasticity for high strength formable steelsCurrent Opinion in Solid State and Materials Science, 2004
- Microstructure and evolution of mechanically-induced ultrafine grain in surface layer of AL-alloy subjected to USSPActa Materialia, 2002
- High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — applicationInternational Journal of Plasticity, 2000
- Microstructural evolution in a non-cell forming metal: AlMgActa Metallurgica et Materialia, 1993