Chemical analysis of deposits formed on the reactor walls during silicon and metal gate etching processes
- 1 September 2006
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Vol. 24 (5) , 2191-2197
Abstract
One major challenge in plasma etching processes for integrated circuit’s fabrication is to achieve wafer-to-wafer repeatability. This requires an excellent control of the plasma chamber wall conditions. For gate etching processes this is achieved by cleaning the interior surfaces of the plasma chamber with appropriate plasma chemistries after each wafer is etched. This strategy relies on the knowledge of the chemical composition of the layer coated on the reactor walls after the etching process. However, this is generally not the case and the chemical nature of this layer varies significantly with the etching conditions. In particular, the chemical nature of the coatings formed on the reactor walls during gate etching processes, which require up to seven successive etching steps in different plasma chemistries, has never been investigated in detail. In addition, the introduction of metals and high k in the gate stack can lead to types of coatings on the reactor walls. In the present article, we have used x-ray photoelectron spectroscopy analysis to monitor the chemical nature of the layers coated on the reactor walls after each step of silicon gate patterning steps. The results are compared to a metal (TiN) gate etching process, which includes nine different etching steps.Keywords
This publication has 20 references indexed in Scilit:
- New chamber walls conditioning and cleaning strategies to improve the stability of plasma processesPlasma Sources Science and Technology, 2005
- Production and loss mechanisms of SiClX etch products during silicon etching in a high density HBr∕Cl2∕O2 plasmaJournal of Applied Physics, 2004
- Analysis of the chemical composition and deposition mechanism of the SiOx–Cly layer on the plasma chamber walls during silicon gate etchingJournal of Vacuum Science & Technology A, 2004
- Monitoring chamber walls coating deposited during plasma processes: Application to silicon gate etch processesJournal of Vacuum Science & Technology A, 2004
- Enhancement of the recombination rate of Br atoms by CF4 addition and resist etching in HBr/Cl2/O2 plasmasJournal of Applied Physics, 2003
- Formation and removal of composite halogenated silicon oxide and fluorocarbon films deposited on chamber walls during plasma etching of multiple film stacksJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2002
- Maintaining reproducible plasma reactor wall conditions: SF6 plasma cleaning of films deposited on chamber walls during Cl2/O2 plasma etching of SiJournal of Vacuum Science & Technology A, 2002
- Effect of chamber wall conditions on Cl and Cl2 concentrations in an inductively coupled plasma reactorJournal of Vacuum Science & Technology A, 2002
- New diagnostic method for monitoring plasma reactor walls: Multiple total internal reflection Fourier transform infrared surface probeReview of Scientific Instruments, 2001
- Characteristics and mechanism of etch process sensitivity to chamber surface conditionJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2001