III-V/Si dual junction solar cell at scale: Manufacturing cost estimates for step-cell based technology
- 1 January 2018
- journal article
- conference paper
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 10 (1) , 015905
Abstract
Here, we use a bottom-up approach to estimate the manufacturing costs of GaAsP/Si dual junction (DJ) solar cells, fabricated using step-cell technology. Step-cell features facilitate fast epitaxial lift-off while at the same time can be used to optimize tandem cell performance. The estimated step-cell costs are compared with commercially available GaInP/GaAs/Ge triple junction solar cells. For III-V layers grown on Si, it is assumed that graded Si1-yGey buffer layers are used to manage III-V and Si lattice mismatch. Three different scenarios are considered, basing future estimates on an extensive literature survey. The results show distinct cost benefits of Si based growth versus Ge, mainly due to substrate recycling enabled by epitaxial lift-off of III-V layers. Furthermore, the results indicate that major cost contributors for bonded GaAsP/Si step-cells are metal-organic chemical vapor deposition growth of III-V layers and wafer carrier and bonding, with ∼$9.1/W manufacturing costs for a 30% efficient cell on an 8 in. wafer, under the reference scenario. Under a long-term scenario, this cost is reduced to $1.5/W for a 35% efficient cell. Moreover, with this cost advantage over commercially available monolithic Ge-based multi-junction solar cells, a Si-based DJ step-cell is a likely candidate for a high efficiency low cost energy source, with applications in the areas requiring light-weight power solutions.Keywords
Funding Information
- Masdar Institute of Science and Technology
This publication has 27 references indexed in Scilit:
- Raising the one-sun conversion efficiency of III–V/Si solar cells to 32.8% for two junctions and 35.9% for three junctionsNature Energy, 2017
- Solar cell efficiency tables (version 50)Progress in Photovoltaics: Research and Applications, 2017
- Solar cell efficiency tables (version 49)Progress in Photovoltaics: Research and Applications, 2016
- Theoretical efficiency limit for a two-terminal multi-junction “step-cell” using detailed balance methodJournal of Applied Physics, 2016
- Improvement in separation rate of epitaxial lift-off by hydrophilic solvent for GaAs solar cell applicationsSolar Energy Materials and Solar Cells, 2014
- III–V multijunction solar cells for concentrating photovoltaicsEnergy & Environmental Science, 2008
- Thin-film GaAs epitaxial lift-off solar cells for space applicationsProgress in Photovoltaics: Research and Applications, 2005
- Impact of dislocations on minority carrier electron and hole lifetimes in GaAs grown on metamorphic SiGe substratesApplied Physics Letters, 2004
- Modeling of two-junction, series-connected tandem solar cells using top-cell thickness as an adjustable parameterJournal of Applied Physics, 1990
- Effect of dislocations on the efficiency of thin-film GaAs solar cells on Si substratesJournal of Applied Physics, 1986