Studies of electrical resistivity of an annealed Cu-Fe composite
- 7 May 2013
- journal article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 113 (17) , 173708
Abstract
Cu-15 vol. % Fe composites produced by cold deformation were annealed at various temperatures for 1 h. The electrical resistivity, tensile strength, and microstructure were investigated by four-probe technique, electronic universal testing machine, and scanning electron microscopy (SEM), respectively. The Fe solubility in Cu-matrix was estimated from the saturation magnetization of the composites. The results reveal that the resistivity of impurity scattering ρimp is the main contributor to the resistivity of the Cu-Fe composites if the phonon and dislocation scattering contributions to the electrical resistivity are considered to be constants. At annealing temperatures below 500 °C, an increase of filament spacing and reduction of interface area in unit volume result in a marginal decrease of the resistivity with temperatures. Above 500 °C, the Fe solubility in Cu-matrix rapidly increases with temperature, which directly causes the increase of composites resistivity.Keywords
This publication has 26 references indexed in Scilit:
- Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materialsMRS Bulletin, 2010
- Analytical modeling of the electrical conductivity of metal matrix composites: application to Ag–Cu and Cu–NbMaterials Science and Engineering: A, 2003
- Effect of annealing on saturation magnetization in deformed Cu–Fe alloys with transformed Fe particlesMaterials Science and Engineering: A, 2002
- Recent advances in the manufacturing of copper-base compositesJournal of Materials Processing Technology, 1996
- Magnetic Properties of Nanostructured MaterialsChemistry of Materials, 1996
- On the stability of cold drawn, two-phase wiresActa Metallurgica et Materialia, 1995
- Microstructure and strength of CuFe in situ composites obtained from prealloyed CuFe powdersActa Metallurgica et Materialia, 1994
- Effect of temperature on the strength and conductivity of a deformation processed Cu-20%Fe compositeJournal of Materials Science, 1992
- Strength and conductivity ofin situ Cu-Fe alloysJournal of Materials Science, 1989
- Microstructural strengthening in cold worked in situ Cu-14.8 Vol. % Fe compositesScripta Metallurgica, 1981