Iron-chromium-carbon-vanadium white cast irons: Microstructure and properties
Open Access
- 1 January 2014
- journal article
- Published by National Library of Serbia in Hemijska industrija
- Vol. 68 (4) , 413-427
Abstract
The as-cast microstructure of Fe-Cr-C-V white irons consists of M7C3 and vanadium rich M6C5 carbides in austenitic matrix. Vanadium changed the microstructure parameters of phase present in the structure of these alloys, including volume fraction, size and morphology. The degree of martensitic transformation also depended on the content of vanadium in the alloy. The volume fraction of the carbide phase, carbide size and distribution has an important influence on the wear resistance of Fe-Cr-C-V white irons under low-stress abrasion conditions. However, the dynamic fracture toughness of Fe-Cr-C-V irons is determined mainly by the properties of the matrix. The austenite is more effective in this respect than martensite. Since the austenite in these alloys contained very fine M23C6 carbide particles, higher fracture toughness was attributed to a strengthening of the austenite during fracture. Besides, the secondary carbides which precipitate in the matrix regions also influence the abrasion behaviour. By increasing the matrix strength through a dispersion hardening effect, the fine secondary carbides can increase the mechanical support of the carbides. Deformation and appropriate strain hardening occur in the retained austenite of Fe-Cr-C-V alloys under repeated impact loading. The particles of precipitated M23C6 secondary carbides disturb dislocations movement and contribute to increase the effects of strain hardening in Fe-Cr-C-V white irons.Keywords
This publication has 47 references indexed in Scilit:
- Correlation of microstructure with the wear resistance and fracture toughness of white cast iron alloysMetals and Materials International, 2013
- Effects of heat treatment on wear resistance and fracture toughness of duo-cast materials composed of high-chromium white cast iron and low-chromium steelMetallurgical and Materials Transactions A, 2006
- Thermodynamic calculations for Nb-containing high-speed steels and white-cast-iron alloysMetallurgical and Materials Transactions A, 2003
- Solidification structure and abrasion resistance of high chromium white ironsMetallurgical and Materials Transactions A, 1997
- The influence of heat treatment on the high-stress abrasion resistance and fracture toughness of alloy white cast ironsMetallurgical and Materials Transactions A, 1995
- The influence of vanadium on fracture toughness and abrasion resistance in high chromium white cast ironsJournal of Materials Science, 1994
- Modification of Fe-Cr-C alloys using mischmetalJournal of Materials Science Letters, 1994
- The influence of niobium on fracture toughness and abrasion resistance in high-chromium white cast ironsJournal of Materials Science Letters, 1993
- Phase equilibria, solidification and solid-state transformations of white cast irons containing niobiumJournal of Materials Science, 1987
- Optimizing fracture toughness and abrasion resistance in white cast ironsMetallurgical Transactions A, 1980