Fabrication of a durable anti-icing composite coating based on polyurethane elastomer and silica nanoparticles
Authors:
Open Access
- 1 May 2022
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 9 (5) , 055504
Abstract
In order to design and fabricate hydrophobic, durable and anti-icing coating for aircraft, a polyurethane elastomer matrix was hydrophobically modified and incorporated with fluorinated SiO2 nanoparticles to prepare a micro/nanostructured coating. The micro/nanostructured coating with low surface energy displayed significantly improved mechanical properties and hydrophobicity, which exhibited the water contact angle of 162° as well as the sliding angle of 2°. The coating is highly stretchable, which could sustain large-scale extension, and exhibits tensile strength and elongation at break up to 16.22 MPa and 385%, respectively. Furthermore, the coating exhibited a remarkably weak ice adhesion strength of 14.33 kPa, on which the accumulative ice is prone to fall off under natural wind and its own weight. The coating sustained long-term superhydrophobic properties and anti-icing performance even after 1000 abrasion cycles. The proposed method for the production of scalable superhydrophobic coating is cost-effective and can be applied in aerospace and automotive anti-icing systems.Keywords
This publication has 54 references indexed in Scilit:
- Hydrophobization of Inorganic Oxide Surfaces Using DimethylsilanediolLangmuir, 2013
- Fracture resistance of rubbers with MWCNT, organoclay, silica and carbon black fillers as assessed by the J-integral: Effects of rubber type and filler concentrationExpress Polymer Letters, 2012
- Anti-icing and de-icing techniques for wind turbines: Critical reviewCold Regions Science and Technology, 2011
- Relationships between Water Wettability and Ice AdhesionACS Applied Materials & Interfaces, 2010
- Unlubricated rolling and sliding wear against steel of carbon‐black‐reinforced and in situ cured polyurethane containing ethylene/propylene/diene rubber compoundsJournal of Applied Polymer Science, 2009
- Friction and wear of HNBR with different fillers under dry rolling and sliding conditionsExpress Polymer Letters, 2009
- Tribological testing of peroxide cured HNBR with different MWCNT and silica contents under dry sliding and rolling conditions against steelJournal of Applied Polymer Science, 2008
- Transformation of a Simple Plastic into a Superhydrophobic SurfaceScience, 2003
- Aircraft anti-icing and de-icing techniques and modelingJournal of Aircraft, 1996
- Ice accretion on aircraft wings with thermodynamic effectsJournal of Aircraft, 1995