Room temperature NO 2 -sensing properties of hexagonal tungsten oxide nanorods
Authors:
- 1 February 2017
- journal article
- research article
- Published by IOP Publishing in Chinese Physics B
- Vol. 26 (2) , 020701
Abstract
Hexagonal WO3 nanorods were synthesized through a facile hydrothermal method. The nanorods properties were investigated by scanning electron microscope (SEM), transmission electron microscope (TEM), energy dispersive spectroscopy (EDS), and x-ray diffraction (XRD). The NO2-sensing performances in terms of sensor response, response/recovery times and repeatability at room temperature were optimized by varying the heat treatment temperature of WO3 nanorods. The optimized NO2 sensor (400-°C-annealed WO3 nanorods) showed an ultra-high sensor response of 3.2 and short response time of 1 s to 5-ppm NO2. In addition, the 400-°C-annealed sample exhibited more stable repeatability. Furthermore, dynamic responses measurements of annealed samples showed that all the annealed WO3 nanorods sensors presented p-type behaviors. We suppose the p-type behavior of the WO3 nanorods sensor to be that an inversion layer is formed in the space charge layer when the sensor is exposed to NO2 at room temperature.Therefore, the 400-°C-annealed WO3 nanorods sensor is one of the most energy conservation candidates to detect NO2 at room temperature.Keywords
This publication has 30 references indexed in Scilit:
- NO sensors based on semiconducting metal oxide nanostructures: Progress and perspectivesSensors and Actuators B: Chemical, 2012
- Low-temperature hydrothermal synthesis of WO3 nanorods and their sensing properties for NO2Journal of Materials Chemistry, 2012
- In-situ bridging of SnO2 nanowires between the electrodes and their NO2 gas sensing characteristicsApplied Surface Science, 2011
- WO3-based NO2 sensors fabricated through low frequency AC electrophoretic depositionSensors and Actuators B: Chemical, 2010
- Thermal treatment effects on the material and gas-sensing properties of room-temperature tungsten oxide nanorod sensorsSensors and Actuators B: Chemical, 2009
- Ultrahigh-sensitive WO3 nanosensor with interdigitated Au nano-electrode for NO2 detectionSensors and Actuators B: Chemical, 2008
- Bias modulated highly sensitive NO2 gas detection using carbon nanotubesSensors and Actuators B: Chemical, 2008
- Low temperature NO2 sensitivity of nano-particulate SnO2 film for work function sensorsSensors and Actuators B: Chemical, 2001
- Effects of heat annealing on the film characteristics and gas sensing properties of substituted and un-substituted copper phthalocyanine filmsApplied Surface Science, 2001
- Highly sensitive semiconductor NOx gas sensor operating at room temperatureSensors and Actuators B: Chemical, 2000