An advanced prediction model for shear strength of slender reinforced concrete beams: Integrating shear transfer mechanisms and size effects
- 23 November 2025
- journal article
- Published by Wiley in Structural Concrete
Abstract
This study presents a comprehensive prediction model for the shear strength of slender reinforced concrete (RC) beams, applicable to both beams with and without shear reinforcement. The model is grounded in a unified mechanical framework that combines the contributions of distinct shear transfer mechanisms at the ultimate limit state—namely, uncracked concrete compression, aggregate interlock, dowel action, residual tensile stress, and, where applicable, shear reinforcement through a variable‐angle truss mechanism. For beams without stirrups, a novel size effect factor—based on width‐to‐depth ( b / d ), effective span‐to‐depth ( l eff / d ), and aggregate size‐to‐depth ( a g / d ) ratios—was introduced and optimized via genetic algorithms. The model was trained using a large experimental database and validated on independent data, ensuring strong generalizability. Validation showed high predictive accuracy: for beams without stirrups, R 2 = 0.9205 and RMSE = 34.79 kN; for beams with stirrups, R 2 = 0.8343 and RMSE = 46.46 kN. Compared to design codes (ACI 318‐19, EN 1992‐1‐1:2023, CSA A23.3‐19) and paper‐based equations, the proposed model demonstrated superior performance, with V exp / V pred means of 1.05 (no stirrups) and 1.04 (with stirrups), and lower standard deviations. Mechanism‐wise, the model quantified average contributions: in beams without shear reinforcement, concrete compression (49.0%) and aggregate interlock (44.5%) were dominant; in beams with shear reinforcement, stirrups (48.7%) and dowel action (25.8%) provided the main resistance, with lesser contributions from concrete compression (23.0%) and negligible residual effects. These insights, visualized through stacked bar charts, reveal the shifting role of mechanisms depending on reinforcement presence. Overall, the model provides a reliable, mechanism‐based framework for RC shear prediction and offers potential extensions to dynamic loads, new materials, and more complex geometries.Keywords
Funding Information
- Addis Ababa Science and Technology University (IGP 007/2023)
This publication has 51 references indexed in Scilit:
- A review on genetic algorithm: past, present, and futureMultimedia Tools and Applications, 2020
- Influence of steel fibers on the dowel action of RC beams without stirrupsEngineering Structures, 2020
- Review of fundamental assumptions of the Two-Phase model for aggregate interlocking in cracked concrete using numerical methods and experimental evidenceCement and Concrete Research, 2019
- Size effect in shear failure of RC beams with stirrups: Simulation and formulationEngineering Structures, 2019
- An analysis of the shear‐transfer actions in reinforced concrete members without transverse reinforcement based on refined experimental measurementsStructural Concrete, 2017
- The compression chord capacity model for the shear design and assessment of reinforced and prestressed concrete beamsStructural Concrete, 2016
- Predicting the shear–flexural strength of slender reinforced concrete T and I shaped beamsEngineering Structures, 2015
- Shear-flexural strength mechanical model for the design and assessment of reinforced concrete beams subjected to point or distributed loadsFrontiers of Structural and Civil Engineering, 2014
- Analytical model for shear strength of ordinary and prestressed concrete beamsEngineering Structures, 2013
- A state-of-the-art review on shear-frictionEngineering Structures, 2012