Effect of Textural Properties on the Adsorption and Desorption of Toluene on the Metal-Organic Frameworks HKUST-1 and MIL-101
Open Access
- 1 April 2013
- journal article
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 31 (4) , 325-339
Abstract
The adsorption and desorption of toluene on metal-organic frameworks HKUST-1 and MIL-101 were studied. The adsorption isotherms and kinetic curves of toluene on HKUST-1 and MIL-101 were separately measured by gravimetric method. Temperature-programmed desorption experiments were carried out for estimating the interaction of toluene with the surfaces of HKUST-1 and MIL-101. Our experimental results showed that the isotherms of toluene on the adsorbents were well fitted by the Langmuir–Freundlich equation. The maximum amount of toluene adsorbed on MIL-101 was 15.1 mmol/g, which was much higher than that adsorbed on HKUST-1 (6.6 mmol/g). The high adsorption capacity of MIL-101 can be attributed to its higher surface area. However, the isotherm of toluene at P/P0 < 0.09 on HKUST-1 was much higher than that on MIL-101 owing to the smaller pore size of HKUST-1. It is suggested that HKUST-1 had better adsorption performance than MIL-101 at low concentration of volatile organic compounds. The desorption activation energies, Ed, of toluene on HKUST-1 and MIL-101 were 43.8 and 30.2 kJ/mol, respectively, meaning that the interaction of toluene with HKUST-1 was stronger than that with MIL-101. In addition, the diffusion coefficient of toluene within HKUST-1 was smaller than that within MIL-101. Results of thermal desorption experiments showed that the desorption efficiency of toluene from HKUST-1 and MIL-101 can separately reach above 93% and nearly 100% at 393 K, respectively.Keywords
This publication has 29 references indexed in Scilit:
- Sorption Properties of Ordered Mesoporous Silica for Toluene and Ethyl AcetateAdsorption Science & Technology, 2011
- n-Butane adsorption on Cu3(btc)2 and MIL-101Microporous and Mesoporous Materials, 2010
- Gas Adsorption Properties of the Chromium-Based Metal Organic Framework MIL-101The Journal of Physical Chemistry C, 2009
- High pressure methane adsorption in the metal-organic frameworks Cu3(btc)2, Zn2(bdc)2dabco, and Cr3F(H2O)2O(bdc)3Microporous and Mesoporous Materials, 2008
- Sorption Equilibrium and Thermal Regeneration of Acetone and Toluene Vapors on an Activated CarbonIndustrial & Engineering Chemistry Research, 2007
- Microwave Synthesis of Chromium Terephthalate MIL‐101 and Its Benzene Sorption AbilityAdvanced Materials, 2006
- A Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface AreaScience, 2005
- Structure and Diffusion Characterization of SBA-15 MaterialsLangmuir, 2005
- Systematic Design of Pore Size and Functionality in Isoreticular MOFs and Their Application in Methane StorageScience, 2002
- A Chemically Functionalizable Nanoporous Material [Cu 3 (TMA) 2 (H 2 O) 3 ]
n
Science, 1999