Applications of Nanofluids in Minimum Quantity Lubrication Machining

Authors:
  • AAAbdullah Aslan
    Abdullah Aslan
  • ESEmin Salur
    Emin Salur

Abstract
In order to meet the needs of human beings, it is seen that the development of technology has accelerated more than ever before, and the need for both production efficiency and ecological efficiency has increased significantly. After the technological developments reached a certain level, the importance of efficiency increased because the concept of sustainable development was put forward and discussed by researchers. Sustainable manufacturing is defined as the product creates less negative environmental impact while improving the efficiency of the process, using less resources, producing a minimum amount of waste, and providing more operational safety. As in many production sectors, the metalworking and machining fields are also affected by this situation. One of the most important parameters, which control the production efficiency, is wear. Wear can be controlled as far as possible with different cooling/lubricating methods such as flood cooling, minimum quantity lubrication (MQL), high pressure and cryogenic cooling, and dry. These cooling/lubricating methods are currently being studied and performed by many researchers and manufacturers for different materials, machining types, and machining parameters. There are many disadvantages among these cooling/lubrication methods such as excessive cutting fluid consumption, which adversely affect the environment, high wear rate, difficulty of use, etc. Although cutting fluid is used very little, the MQL cooling method comes to the fore because it increases the efficiency considerably. Besides, many nanoparticles, such as MoS2, hBN, Al2O3, SiO2, CNTs, TiO2, SiC, TiC, AlN, SiN, CuO, GnP, and graphite are preferred as additives in order to enhance the cooling and lubrication behaviors of cutting fluids. The main focus of this section is to classify the types of nanofluids used in the MQL method and give information about applications of nanofluids on drilling, turning, milling, and grinding processes. In addition, explanation of how the nanofluid increases the cooling efficiency in the MQL method and determination of relationship of the nanofluid with the workpiece materials and the process parameters are other outstanding aspects of this study.