Revisión sobre nitruraciones láser de aleaciones de titanio
Authors:
- M. G. Pérez-ArtiedaMPM. G. Pérez-Artieda
- J. Fernández-CarrasquillaJFJ. Fernández-Carrasquilla
Open Access
- 30 December 2010
- journal article
- Published by Editorial CSIC in Revista de Metalurgia
- Vol. 46 (6) , 530-541
Abstract
Una técnica comúnmente utilizada para la mejora de la resistencia a desgaste de las aleaciones de titanio es la nitruración de la superficie, utilizando la deposición física o química de vapor, la implantación iónica o el refundido de la superficie en atmósferas que contienen nitrógeno. En esta revisión se estudian los sistemas de nitruración con tecnología láser, utilizados para tratar la superficie de diferentes aleaciones de titanio. Las aleaciones de titanio son un material alternativo al acero, muy atractivo para aplicaciones que requieren alta resistencia a temperaturas elevadas, puesto que tienen una relación resistencia-dureza elevada y buena resistencia a corrosión. En aplicaciones que requieren buena resistencia a desgaste, las aleaciones de titanio suponen un problema, debido a sus pobres características tribológicas. La utilización de aleaciones de titanio junto con un tratamiento de nitruración adecuado, podría permitir la sustitución del acero en diferentes aplicaciones, consiguiendo una disminución en el peso de los componentes fabricados.A common technique used to improve the wear response of titanium alloys is to nitride the surface, using chemical or physical vapour deposition, ion implantation or surface remelting in a nitrogen atmosphere. In this revision nitriding systems with laser technology are studied, used in titanium alloys surface treatments. For high temperature, high strength applications, titanium based alloys are an attractive light-weight alternative to steel, due to their high strength to weight ratio and corrosion resistance. In applications that require good wear resistance, titanium alloys pose a problem due to their poor tribological characteristics. Titanium alloys used with a suitable nitriding treatment could allow the replacement of steel in different applications, obtaining weight savings in fabricated componentsKeywords
This publication has 31 references indexed in Scilit:
- Surface nitriding of Ti–6Al–4V alloy with a high power CO2 laserOptics & Laser Technology, 2008
- Research progress on laser surface modification of titanium alloysApplied Surface Science, 2005
- Kinetics of titanium nitride coatings deposited by thermo-reactive deposition techniqueVacuum, 2004
- Surface nitriding of titanium in arc plasmaJournal of Materials Processing Technology, 2003
- Nitriding of titanium under CW CO2 laser radiationThin Solid Films, 1997
- The use of titanium for medical applications in the USAMaterials Science and Engineering: A, 1996
- An overview on the use of titanium in the aerospace industryMaterials Science and Engineering: A, 1996
- Crack-free hard surfaces produced by laser nitriding of commercial purity titaniumMaterials Science and Engineering: A, 1994
- Corrosion performance of layered coatings produced by physical vapour depositionSurface and Coatings Technology, 1990
- Surface Engineering of Titanium with NitrogenSurface Engineering, 1986