Synthesis and Characterization of Lithium Mining Waste and Metakaolin-Based Geopolymers
Open Access
- 6 May 2026
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (19) , 27913-27930
Abstract
The growing demand for lithium has driven aggressive extraction activities, often associated with several environmental challenges, such as tailings dams. It is estimated that for every ton of lithium carbonate produced, approximately 10 tons of refinery waste are generated. In this scenario, geopolymers have emerged as a promising alternative for recycling large volumes of waste into high-value, technologically advanced products. This study presents a detailed investigation into the influence of lithium mining waste (LiMW) on the mechanical and chemical properties of metakaolin-based geopolymers. The LiMW is mainly composed of albite, quartz, and muscovite. Two types of metakaolin were employed as aluminosilicate sources, and varying proportions of alkaline solution were used to synthesize geopolymers incorporating 0 to 60% LiMW. The incorporation of mining waste, up to an adequate proportion, significantly enhanced the compressive strength of both syntheses. The best compressive strength was achieved by incorporating 40% of mining waste in both syntheses. The geopolymer produced with Sulfal Metakaolin (MKS) achieved 54.1 MPa, while the geopolymer synthesized with Metakaolin of Brazil (MKB) reached 32.4 MPa after 7 days of curing. The optimal liquid-to-solid ratios reached using MKS and MKB were 0.34 and 0.30, respectively. XRD, FT-IR, 27Al and 29Si NMR, and SEM/EDS characterized the resulting geopolymers of both syntheses. The results obtained in this work are comparable to or even exceed those achieved with Portland cement, highlighting the applicability of LiMW as a viable component in geopolymeric binders, especially in materials applied to the civil construction sector.Keywords
Funding Information
- Fundação de Amparo à Pesquisa do Estado de Minas Gerais
- Conselho Nacional de Desenvolvimento Científico e Tecnológico
- Financiadora de Estudos e Projetos
- Instituto Nacional de Ciência e Tecnologia Midas
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
This publication has 89 references indexed in Scilit:
- A Perspective on Emerging and Future Sintering Technologies of Ceramic MaterialsAdvanced Engineering Materials, 2023
- Influence of activator type on reaction kinetics, setting time, and compressive strength of alkali-activated mineral woolsJournal of Thermal Analysis and Calorimetry, 2020
- Microstructural Analysis and Strength Development of One-Part Alkali-Activated Slag/Ceramic Binders Under Different Curing RegimesWaste and Biomass Valorization, 2019
- Enhancing the reactivity of aluminosilicate materials toward geopolymer synthesisJournal of Materials Science, 2017
- Effects of curing time and temperature on strength development of inorganic polymeric binder based on natural pozzolanJournal of Materials Science, 2009
- Geopolymer technology: the current state of the artJournal of Materials Science, 2006
- Solid-state nuclear magnetic resonance and infrared spectroscopy of alkali feldsparsScience in China Series D: Earth Sciences, 1997
- GeopolymersJournal of Thermal Analysis and Calorimetry, 1991
- Solid‐State NMR Studies of the Structure and Reactivity of MetakaoliniteAngewandte Chemie International Edition, 1990
- 27Al, 29Si, and 23Na MAS NMR study of an Al, Si ordered alkali feldspar solid solution seriesPhysics and Chemistry of Minerals, 1988